mirror of https://github.com/nealey/Simon-Says
46 lines
1.3 KiB
Plaintext
46 lines
1.3 KiB
Plaintext
|
/*
|
||
|
|
|
||
|
|
Simon Experiments #1
|
||
|
|
Blink
|
||
|
|
Pete Lewis
|
||
|
|
Sparkfun Electronics
|
||
|
|
10/13/2010
|
||
|
|
|
||
|
|
This example code is in the public domain.
|
||
|
|
|
||
|
|
//////////////////////////////////////////////////
|
||
|
|
SETUP & UPLOAD INSTRUCTIONS
|
||
|
|
1. Select "Tools" from the upper window menu.
|
||
|
|
2. Select "Serial Port" and then select the COM PORT that your FTDI BASIC is connected on. (It most likely will be the COM 2 or higher).
|
||
|
|
3. Select "Tools", then "Board", then "LilyPad Arduino w/ ATmega328"
|
||
|
|
4. Click on the "upload button" - it looks like a box with an arrow to the right.
|
||
|
|
//////////////////////////////////////////////////
|
||
|
|
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
int ledPin = 3; // The simon board has 4 LEDs on it.
|
||
|
|
// For this example, we're just going to use one.
|
||
|
|
// The other LEDs are on pins 3,5,10 and 13.
|
||
|
|
// For fun, try switching "ledPin" to another LED and see what happens!
|
||
|
|
|
||
|
|
|
||
|
|
// The setup() funtion runs once, when the sketch starts
|
||
|
|
|
||
|
|
void setup() {
|
||
|
|
// initialize the digital pin as an output:
|
||
|
|
pinMode(ledPin, OUTPUT);
|
||
|
|
}
|
||
|
|
|
||
|
|
// the loop() function runs over and over again,
|
||
|
|
// as long as the Arduino has power
|
||
|
|
|
||
|
|
void loop()
|
||
|
|
{
|
||
|
|
digitalWrite(ledPin, HIGH); // set the LED on
|
||
|
|
delay(1000); // wait for a second
|
||
|
|
digitalWrite(ledPin, LOW); // set the LED off
|
||
|
|
delay(1000); // wait for a second
|
||
|
|
}
|