mirror of https://github.com/nealey/Simon-Says
81 lines
2.7 KiB
C++
Executable File
81 lines
2.7 KiB
C++
Executable File
/*
|
|
|
|
Simon Experiments #2
|
|
Button
|
|
Pete Lewis
|
|
Sparkfun Electronics
|
|
10/13/2010
|
|
|
|
//////////////////////////////////////////////////
|
|
SETUP & UPLOAD INSTRUCTIONS
|
|
1. Select "Tools" from the upper window menu.
|
|
2. Select "Serial Port" and then select the COM PORT that your FTDI BASIC is connected on. (It most likely will be the COM 2 or higher).
|
|
3. Select "Tools", then "Board", then "LilyPad Arduino w/ ATmega328"
|
|
4. Click on the "upload button" - it looks like a box with an arrow to the right.
|
|
//////////////////////////////////////////////////
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "WProgram.h"
|
|
void setup();
|
|
void loop();
|
|
int ledPin = 3; // The simon board has 4 LEDs on it.
|
|
// For this example, we're just going to use one.
|
|
// The other LEDs are on pins 3,5,10 and 13.
|
|
// For fun, try switching "ledPin" to another pin number and see what happens!
|
|
|
|
int buttonPin = 2; // The simon board has 4 BUTTONS on it.
|
|
// For this example, we're just going to use one.
|
|
// The other BUTTONS are on pins 2,6,9 and 12.
|
|
// For fun, try switching "buttonPin" to another pin number and see what happens!
|
|
|
|
int button_state; // This variable will be used to "store" the state of the button.
|
|
// It will allow us to know whether the button is pressed or not.
|
|
|
|
|
|
// The setup() funtion runs once, when the sketch starts
|
|
|
|
void setup() {
|
|
// initialize the led pin as an output:
|
|
pinMode(ledPin, OUTPUT);
|
|
// initialize the button pin as an input:
|
|
pinMode(buttonPin, INPUT);
|
|
}
|
|
|
|
// the loop() function runs over and over again,
|
|
// as long as the Arduino has power
|
|
|
|
void loop()
|
|
{
|
|
|
|
// Using the digitalRead() function, we can read the state of a pin, and know whether or not it is Logic HIGH or Logic LOW.
|
|
// When you press the button, you are actually causing an electrical connection between the pin on the micro (buttonPin) and Logic HIGH (aka power).
|
|
// Every time the loop starts over it will first set the variable "button_state" to the state of the pin.
|
|
// It is refreshing every time the loop starts over.
|
|
int button_state = digitalRead(buttonPin);
|
|
|
|
// The second step in the loop is to actually do something with this variable.
|
|
// In this next "if statement" we are going to decide to do something. Here we are going to turn on the ledPin for a second.
|
|
if(button_state == 1){
|
|
digitalWrite(ledPin, HIGH); // set the LED on
|
|
delay(1000); // wait for a second
|
|
digitalWrite(ledPin, LOW); // set the LED off
|
|
}
|
|
|
|
}
|
|
|
|
int main(void)
|
|
{
|
|
init();
|
|
|
|
setup();
|
|
|
|
for (;;)
|
|
loop();
|
|
|
|
return 0;
|
|
}
|
|
|