1Uilleann
2=======
3
4This is my work to model a 3D printable Uilleann Pipe full set.
5
6I need a better name for this project.
7
8
9Printing Advice
10=============
11
12Reeds
13------
14
15The Daye drones feature 3D printable reeds,
16based on the laudable work of Animatorgeek.
17Reeds need to simulate natural cane,
18so the following print settings should be used on every reed:
19
20Fill pattern: Aligned Rectilinear
21Fill density: 100%
22Fill angle: 90°
23Bottom solid layers: 0
24Layer height: 0.05
25Perimiters: 1
26Seam position: Aligned (or whatever gets seams off the reed and onto the base)
27Top solid layers: 0
28
29Some light sanding may be required after printing.
30
31Daye
32====
33
34Based on David Daye's Budget Drones and Penny Chanter owned by me.
35David Daye has published extensive notes on how to recreate his builds
36at <https://daye1.com/>, including measurements for these parts.
37
38Rowsome
39=======
40
41This is based on the O'Flynn Leo Rewsome set,
42documented at pipers.id.
43
44http://pipers.ie/source/section/?sectionId=8 has been invaluable, providing
45detailed documentation of measurements of pipes.
46
47* [photos](https://pipers.ie/source/gallery?galleryId=115)
48* [diagrams](http://pipers.ie/source/gallery?galleryId=1353)
49
50Decorations
51----------
52
53The diagrams didn't specify exact values for every measurement,
54so I took some aesthetic liberties with some parts (mostly decorative ones).
55
56Bump-Outs
57----------
58
59I think this chanter has some extra keys that I'm not going to implement,
60so I skipped a lot of the bump-out warty things on the side.