Makefile

@@ -8,13 +8,10 @@ install: build/uilleann.ino.uf2
 	./install.sh $< $(UF2_MOUNT)
 
 # uf2conv.py is covered by an MIT license.
-build/uf2conv.py: build/uf2families.json
+build/uf2conv.py:
 	mkdir -p build
-	curl -L https://raw.githubusercontent.com/microsoft/uf2/master/utils/$(@F) > $@
+	curl -L https://raw.githubusercontent.com/microsoft/uf2/master/utils/uf2conv.py > $@
 	chmod +x $@
-build/uf2families.json:
-	mkdir -p build
-	curl -L https://raw.githubusercontent.com/microsoft/uf2/master/utils/$(@F) > $@
 
 %.uf2: %.bin build/uf2conv.py
 	build/uf2conv.py -b 0x4000 -c -o $@ $<

model/button-all.scad

@@ -0,0 +1,7 @@
+include <button.scad>;
+
+cup();
+translate([0, 0, wall]) magnet();
+
+translate([40, 0, 0]) container();
+translate([40, 0, wall]) magnet();

model/button-container.scad

@@ -0,0 +1,3 @@
+include <button.scad>;
+
+translate([0, 0, 0]) container();

model/button-cup.scad

@@ -0,0 +1,3 @@
+include <button.scad>;
+
+cup();

model/button.scad

@@ -0,0 +1,103 @@
+// This is the button on the bottom of the chanter.
+// You put a magnet in the bottom of it,
+// then jam a unipolar linear hall effect sensor in the body,
+// and you have a cheap and reliable way to detect insertion depth.
+
+// Make circles lovely and round
+$fa = 1; $fs = 0.5;
+
+magnet_od = 17.5; // Outside diameter of the magnet you're using
+magnet_id = 7;
+magnet_h = 6; // I use two ceramic magnets stacked together, to increase the field strength
+throw = 15; // How far you can depress the button
+gap = 2; // How much space we need for the gap. OH59E is 1.57mm thick
+wall = 1.6; // Wall depth
+leg_angle = 30; // How wide a leg should be, in degrees
+tab_w = 2; // Tab height
+
+module magnet() {
+    color("SlateGray") {
+        difference() {
+            cylinder(h=magnet_h, d=magnet_od);
+            translate([0, 0, -0.1]) cylinder(h=magnet_h+0.2, d=magnet_id);
+        }
+    }
+}
+
+// Cup to hold the magnets on the bottom
+magnet_cup_tolerance = 1;
+cup_id = magnet_od + magnet_cup_tolerance;
+cup_od = cup_id + wall*2;
+cup_leg_h = wall + throw;
+peg_d = magnet_id - 0.3;
+
+module cup() {
+    union() {
+        cylinder(h=wall, d=cup_od);
+
+        // A peg in the middle to make it easier to assemble.
+        // This goes all the way so we can print without supports
+        cylinder(h=wall+magnet_h, d=peg_d);
+
+        // The tabs on the sides
+        for (i = [0, 120, 240]) {
+            rotate(i) {
+                rotate_extrude(angle=leg_angle) {
+                    translate([cup_id/2, 0, 0]) square([wall, cup_leg_h]);
+                }
+            }
+            rotate(i + leg_angle*0.1) {
+                rotate_extrude(angle=leg_angle*0.8) {
+                    translate([cup_od/2, cup_leg_h-tab_w, 0]) square(tab_w);
+                }
+            }
+        }
+    }
+}
+
+// The thing the cup slides into
+cup_container_tolerance = 0.5;
+container_id = cup_od + cup_container_tolerance;
+container_od = container_id + wall*4;
+container_h = wall + throw + gap + wall; // Height of the container that the cup goes into
+
+module channel(h) {
+    rotate_extrude(angle=leg_angle) {
+        translate([cup_od/2, 0, 0]) square([tab_w, h]);
+    }
+}
+module container() {
+    difference() {
+        union() {
+            difference() {
+                cylinder(h=container_h, d=container_od);
+
+                // Carve out space for the cup
+                translate([0, 0, wall]) cylinder(h=container_h, d=container_id);
+            
+                // Carve out channels for the tabs
+                channel_w = tab_w + 0.5;
+                for(i = [0, 120, 240]) {
+                    translate([0, 0, wall]) {
+                        // Channel for the throw
+                        rotate(i) channel(throw + wall);
+
+                        // Channel for the screw-in.
+                        // This is going to droop when printing, so we make it a bit wider
+                        rotate(i+leg_angle) channel(tab_w*1.5);
+
+                        // Channel for insertion
+                        rotate(i+leg_angle+leg_angle) channel(container_h);
+                    }
+                }
+            }
+            // Another post to help center magnets
+            cylinder(h=wall+magnet_h, d=peg_d);
+        }
+
+        // Now drill holes for the sensors
+        for (x = [-1.27, 0, 1.27]) {
+            translate([x, 2, 0]) cube([0.8,0.8, container_h], center=true);
+        }
+    }
+}

pcb/fp-info-cache

@@ -0,0 +1,701 @@
+450387
+Capacitor_SMD
+CP_Elec_3x5.3
+SMT capacitor, aluminium electrolytic, 3x5.3, Cornell Dubilier Electronics 
+Capacitor Electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_3x5.4
+SMD capacitor, aluminum electrolytic, Nichicon, 3.0x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x3
+SMD capacitor, aluminum electrolytic, Nichicon, 4.0x3mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x3.9
+SMD capacitor, aluminum electrolytic, Nichicon, 4.0x3.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x4.5
+SMD capacitor, aluminum electrolytic, Nichicon, 4.0x4.5mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x5.3
+SMD capacitor, aluminum electrolytic, Vishay, 4.0x5.3mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x5.4
+SMD capacitor, aluminum electrolytic, Panasonic A5 / Nichicon, 4.0x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x5.7
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 4.0x5.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_4x5.8
+SMD capacitor, aluminum electrolytic, Panasonic, 4.0x5.8mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x3
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x3.0mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x3.9
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x3.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x4.4
+SMD capacitor, aluminum electrolytic, Panasonic B45, 5.0x4.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x4.5
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x4.5mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.3
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x5.3mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.4
+SMD capacitor, aluminum electrolytic, Nichicon, 5.0x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.7
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 5.0x5.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.8
+SMD capacitor, aluminum electrolytic, Panasonic, 5.0x5.8mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_5x5.9
+SMD capacitor, aluminum electrolytic, Panasonic B6, 5.0x5.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x3
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x3.0mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x3.9
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x3.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x4.5
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x4.5mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x4.9
+SMD capacitor, aluminum electrolytic, Panasonic C5, 6.3x4.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.2
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 6.3x5.2mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.3
+SMD capacitor, aluminum electrolytic, Cornell Dubilier, 6.3x5.3mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.4
+SMD capacitor, aluminum electrolytic, Panasonic C55, 6.3x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.4_Nichicon
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.7
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 6.3x5.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.8
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x5.8mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x5.9
+SMD capacitor, aluminum electrolytic, Panasonic C6, 6.3x5.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x7.7
+SMD capacitor, aluminum electrolytic, Nichicon, 6.3x7.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_6.3x9.9
+SMD capacitor, aluminum electrolytic, Panasonic C10, 6.3x9.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x5.4
+SMD capacitor, aluminum electrolytic, Nichicon, 8.0x5.4mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x6.2
+SMD capacitor, aluminum electrolytic, Nichicon, 8.0x6.2mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x6.5
+SMD capacitor, aluminum electrolytic, Rubycon, 8.0x6.5mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x6.7
+SMD capacitor, aluminum electrolytic, United Chemi-Con, 8.0x6.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x6.9
+SMD capacitor, aluminum electrolytic, Panasonic E7, 8.0x6.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x10
+SMD capacitor, aluminum electrolytic, Nichicon, 8.0x10mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x10.5
+SMD capacitor, aluminum electrolytic, Vishay 0810, 8.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_8x11.9
+SMD capacitor, aluminum electrolytic, Panasonic E12, 8.0x11.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x7.7
+SMD capacitor, aluminum electrolytic, Nichicon, 10.0x7.7mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x7.9
+SMD capacitor, aluminum electrolytic, Panasonic F8, 10.0x7.9mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x10
+SMD capacitor, aluminum electrolytic, Nichicon, 10.0x10.0mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x10.5
+SMD capacitor, aluminum electrolytic, Vishay 1010, 10.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x12.5
+SMD capacitor, aluminum electrolytic, Vishay 1012, 10.0x12.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x12.6
+SMD capacitor, aluminum electrolytic, Panasonic F12, 10.0x12.6mm
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_10x14.3
+SMD capacitor, aluminum electrolytic, Vishay 1014, 10.0x14.3mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_16x17.5
+SMD capacitor, aluminum electrolytic, Vishay 1616, 16.0x17.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_16x22
+SMD capacitor, aluminum electrolytic, Vishay 1621, 16.0x22.0mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_18x17.5
+SMD capacitor, aluminum electrolytic, Vishay 1816, 18.0x17.5mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+CP_Elec_18x22
+SMD capacitor, aluminum electrolytic, Vishay 1821, 18.0x22.0mm, http://www.vishay.com/docs/28395/150crz.pdf
+capacitor electrolytic
+0
+2
+2
+Capacitor_SMD
+C_0201_0603Metric
+Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+capacitor
+0
+4
+2
+Capacitor_SMD
+C_0201_0603Metric_Pad0.64x0.40mm_HandSolder
+Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+4
+2
+Capacitor_SMD
+C_0402_1005Metric
+Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_0402_1005Metric_Pad0.74x0.62mm_HandSolder
+Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_0504_1310Metric
+Capacitor SMD 0504 (1310 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_0504_1310Metric_Pad0.83x1.28mm_HandSolder
+Capacitor SMD 0504 (1310 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_0603_1608Metric
+Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_0603_1608Metric_Pad1.08x0.95mm_HandSolder
+Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_0805_2012Metric
+Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_0805_2012Metric_Pad1.18x1.45mm_HandSolder
+Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_01005_0402Metric
+Capacitor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+capacitor
+0
+4
+2
+Capacitor_SMD
+C_01005_0402Metric_Pad0.57x0.30mm_HandSolder
+Capacitor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+4
+2
+Capacitor_SMD
+C_1206_3216Metric
+Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1206_3216Metric_Pad1.33x1.80mm_HandSolder
+Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_1210_3225Metric
+Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1210_3225Metric_Pad1.33x2.70mm_HandSolder
+Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_1812_4532Metric
+Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1812_4532Metric_Pad1.57x3.40mm_HandSolder
+Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_1825_4564Metric
+Capacitor SMD 1825 (4564 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_1825_4564Metric_Pad1.57x6.80mm_HandSolder
+Capacitor SMD 1825 (4564 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_2220_5650Metric
+Capacitor SMD 2220 (5650 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_2220_5650Metric_Pad1.97x5.40mm_HandSolder
+Capacitor SMD 2220 (5650 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_2225_5664Metric
+Capacitor SMD 2225 (5664 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_2225_5664Metric_Pad1.80x6.60mm_HandSolder
+Capacitor SMD 2225 (5664 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_3640_9110Metric
+Capacitor SMD 3640 (9110 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor
+0
+2
+2
+Capacitor_SMD
+C_3640_9110Metric_Pad2.10x10.45mm_HandSolder
+Capacitor SMD 3640 (9110 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator
+capacitor handsolder
+0
+2
+2
+Capacitor_SMD
+C_Elec_3x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 3.0x5.4mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_4x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 4.0x5.4mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_4x5.8
+SMD capacitor, aluminum electrolytic nonpolar, 4.0x5.8mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_5x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_5x5.8
+SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.8mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_6.3x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 6.3x5.4mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_6.3x5.8
+SMD capacitor, aluminum electrolytic nonpolar, 6.3x5.8mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_6.3x7.7
+SMD capacitor, aluminum electrolytic nonpolar, 6.3x7.7mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_8x5.4
+SMD capacitor, aluminum electrolytic nonpolar, 8.0x5.4mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_8x6.2
+SMD capacitor, aluminum electrolytic nonpolar, 8.0x6.2mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_8x10.2
+SMD capacitor, aluminum electrolytic nonpolar, 8.0x10.2mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Elec_10x10.2
+SMD capacitor, aluminum electrolytic nonpolar, 10.0x10.2mm
+capacitor electrolyic nonpolar
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZB4-A
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZB4 TZB4-A
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZB4-B
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZB4 TZB4-A
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZC3
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZC3
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZR1
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZR1
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZW4
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZW4
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Murata_TZY2
+trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb
+ Murata TZY2
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Sprague-Goodman_SGC3
+trimmer capacitor SMD horizontal, http://media.wix.com/ugd/d86717_38d9821e12823a7aa9cef38c6c2a73cc.pdf
+ Sprague Goodman SGC3
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JN
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JN
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JQ
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JQ
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JR
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JR
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JV
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JV
+0
+2
+2
+Capacitor_SMD
+C_Trimmer_Voltronics_JZ
+trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf
+ Voltronics JR
+0
+2
+2

pcb/lib/AT42QT2120.dcm

@@ -0,0 +1,7 @@
+EESchema-DOCLIB  Version 2.0
+#
+$CMP AT42QT2120-XU
+F https://www.mouser.de/datasheet/2/268/doc9634-1369146.pdf
+$ENDCMP
+#
+#End Doc Library

pcb/pcb-B_Cu.gbr

@@ -0,0 +1,60 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:21-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Copper,L2,Bot*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:21*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%TA.AperFunction,ComponentPad*%
+%ADD10R,1.700000X1.700000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD11O,1.700000X1.700000*%
+%TD*%
+G04 APERTURE END LIST*
+D10*
+%TO.P,J2,1,Pin_1*%
+%TO.N,Net-(J2-Pad1)*%
+X133140000Y-105000000D03*
+D11*
+%TO.P,J2,2,Pin_2*%
+%TO.N,Net-(J2-Pad2)*%
+X135680000Y-105000000D03*
+%TO.P,J2,3,Pin_3*%
+%TO.N,Net-(J2-Pad3)*%
+X138220000Y-105000000D03*
+%TO.P,J2,4,Pin_4*%
+%TO.N,Net-(J2-Pad4)*%
+X140760000Y-105000000D03*
+%TO.P,J2,5,Pin_5*%
+%TO.N,Net-(J2-Pad5)*%
+X143300000Y-105000000D03*
+%TO.P,J2,6,Pin_6*%
+%TO.N,Net-(J2-Pad6)*%
+X145840000Y-105000000D03*
+%TO.P,J2,7,Pin_7*%
+%TO.N,Net-(J2-Pad7)*%
+X148380000Y-105000000D03*
+%TO.P,J2,8,Pin_8*%
+%TO.N,Net-(J2-Pad8)*%
+X150920000Y-105000000D03*
+%TO.P,J2,9,Pin_9*%
+%TO.N,Net-(J2-Pad9)*%
+X153460000Y-105000000D03*
+%TO.P,J2,10,Pin_10*%
+%TO.N,Net-(J2-Pad10)*%
+X156000000Y-105000000D03*
+%TO.P,J2,11,Pin_11*%
+%TO.N,Net-(J2-Pad11)*%
+X158540000Y-105000000D03*
+%TO.P,J2,12,Pin_12*%
+%TO.N,Net-(J2-Pad12)*%
+X161080000Y-105000000D03*
+%TD*%
+M02*

pcb/pcb-B_Mask.gbr

@@ -0,0 +1,33 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:23-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Soldermask,Bot*%
+%TF.FilePolarity,Negative*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:23*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10R,1.700000X1.700000*%
+%ADD11O,1.700000X1.700000*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,J2*%
+X133140000Y-105000000D03*
+D11*
+X135680000Y-105000000D03*
+X138220000Y-105000000D03*
+X140760000Y-105000000D03*
+X143300000Y-105000000D03*
+X145840000Y-105000000D03*
+X148380000Y-105000000D03*
+X150920000Y-105000000D03*
+X153460000Y-105000000D03*
+X156000000Y-105000000D03*
+X158540000Y-105000000D03*
+X161080000Y-105000000D03*
+%TD*%
+M02*

pcb/pcb-B_Paste.gbr

@@ -0,0 +1,15 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:21-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Paste,Bot*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:21*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 APERTURE END LIST*
+M02*

pcb/pcb-B_Silkscreen.gbr

@@ -0,0 +1,15 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:22-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Legend,Bot*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:22*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 APERTURE END LIST*
+M02*

pcb/pcb-Edge_Cuts.gbr

@@ -0,0 +1,26 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:23-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Profile,NP*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:23*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%TA.AperFunction,Profile*%
+%ADD10C,0.100000*%
+%TD*%
+G04 APERTURE END LIST*
+D10*
+X122000000Y-116000000D02*
+X196000000Y-116000000D01*
+X196000000Y-116000000D02*
+X196000000Y-102000000D01*
+X196000000Y-102000000D02*
+X122000000Y-102000000D01*
+X122000000Y-102000000D02*
+X122000000Y-116000000D01*
+M02*

pcb/pcb-F_Cu.gbr

@@ -0,0 +1,328 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:21-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Copper,L1,Top*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:21*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 Aperture macros list*
+%AMRoundRect*
+0 Rectangle with rounded corners*
+0 $1 Rounding radius*
+0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
+0 Add a 4 corners polygon primitive as box body*
+4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
+0 Add four circle primitives for the rounded corners*
+1,1,$1+$1,$2,$3*
+1,1,$1+$1,$4,$5*
+1,1,$1+$1,$6,$7*
+1,1,$1+$1,$8,$9*
+0 Add four rect primitives between the rounded corners*
+20,1,$1+$1,$2,$3,$4,$5,0*
+20,1,$1+$1,$4,$5,$6,$7,0*
+20,1,$1+$1,$6,$7,$8,$9,0*
+20,1,$1+$1,$8,$9,$2,$3,0*%
+G04 Aperture macros list end*
+%TA.AperFunction,ComponentPad*%
+%ADD10R,1.700000X1.700000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD11O,1.700000X1.700000*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD12RoundRect,0.150000X0.150000X-0.850000X0.150000X0.850000X-0.150000X0.850000X-0.150000X-0.850000X0*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD13RoundRect,0.249997X5.795003X-2.772503X5.795003X2.772503X-5.795003X2.772503X-5.795003X-2.772503X0*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD14RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD15RoundRect,0.250000X-0.450000X0.350000X-0.450000X-0.350000X0.450000X-0.350000X0.450000X0.350000X0*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD16RoundRect,0.150000X-0.625000X0.150000X-0.625000X-0.150000X0.625000X-0.150000X0.625000X0.150000X0*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD17RoundRect,0.250000X-0.650000X0.350000X-0.650000X-0.350000X0.650000X-0.350000X0.650000X0.350000X0*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD18RoundRect,0.250000X0.337500X0.475000X-0.337500X0.475000X-0.337500X-0.475000X0.337500X-0.475000X0*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD19RoundRect,0.150000X0.625000X-0.150000X0.625000X0.150000X-0.625000X0.150000X-0.625000X-0.150000X0*%
+%TD*%
+%TA.AperFunction,SMDPad,CuDef*%
+%ADD20RoundRect,0.250000X0.650000X-0.350000X0.650000X0.350000X-0.650000X0.350000X-0.650000X-0.350000X0*%
+%TD*%
+G04 APERTURE END LIST*
+D10*
+%TO.P,J2,1,Pin_1*%
+%TO.N,Net-(J2-Pad1)*%
+X133140000Y-105000000D03*
+D11*
+%TO.P,J2,2,Pin_2*%
+%TO.N,Net-(J2-Pad2)*%
+X135680000Y-105000000D03*
+%TO.P,J2,3,Pin_3*%
+%TO.N,Net-(J2-Pad3)*%
+X138220000Y-105000000D03*
+%TO.P,J2,4,Pin_4*%
+%TO.N,Net-(J2-Pad4)*%
+X140760000Y-105000000D03*
+%TO.P,J2,5,Pin_5*%
+%TO.N,Net-(J2-Pad5)*%
+X143300000Y-105000000D03*
+%TO.P,J2,6,Pin_6*%
+%TO.N,Net-(J2-Pad6)*%
+X145840000Y-105000000D03*
+%TO.P,J2,7,Pin_7*%
+%TO.N,Net-(J2-Pad7)*%
+X148380000Y-105000000D03*
+%TO.P,J2,8,Pin_8*%
+%TO.N,Net-(J2-Pad8)*%
+X150920000Y-105000000D03*
+%TO.P,J2,9,Pin_9*%
+%TO.N,Net-(J2-Pad9)*%
+X153460000Y-105000000D03*
+%TO.P,J2,10,Pin_10*%
+%TO.N,Net-(J2-Pad10)*%
+X156000000Y-105000000D03*
+%TO.P,J2,11,Pin_11*%
+%TO.N,Net-(J2-Pad11)*%
+X158540000Y-105000000D03*
+%TO.P,J2,12,Pin_12*%
+%TO.N,Net-(J2-Pad12)*%
+X161080000Y-105000000D03*
+%TD*%
+D12*
+%TO.P,U1,1,KEY8/GPO6*%
+%TO.N,Net-(R8-Pad2)*%
+X166285000Y-113675000D03*
+%TO.P,U1,2,KEY7/GPO5*%
+%TO.N,Net-(R7-Pad2)*%
+X167555000Y-113675000D03*
+%TO.P,U1,3,KEY6/GPO4*%
+%TO.N,Net-(R6-Pad2)*%
+X168825000Y-113675000D03*
+%TO.P,U1,4,KEY5/GPO3*%
+%TO.N,Net-(R5-Pad2)*%
+X170095000Y-113675000D03*
+%TO.P,U1,5,KEY4/GPO2*%
+%TO.N,Net-(R4-Pad2)*%
+X171365000Y-113675000D03*
+%TO.P,U1,6,KEY3/GPO1*%
+%TO.N,Net-(R3-Pad2)*%
+X172635000Y-113675000D03*
+%TO.P,U1,7,KEY2/GP00*%
+%TO.N,Net-(R2-Pad2)*%
+X173905000Y-113675000D03*
+%TO.P,U1,8,KEY1*%
+%TO.N,Net-(R1-Pad2)*%
+X175175000Y-113675000D03*
+%TO.P,U1,9,KEY0*%
+%TO.N,Net-(R0-Pad2)*%
+X176445000Y-113675000D03*
+%TO.P,U1,10,VSS*%
+%TO.N,GND*%
+X177715000Y-113675000D03*
+%TO.P,U1,11,VDD*%
+%TO.N,+5V*%
+X177715000Y-104325000D03*
+%TO.P,U1,12,MODE*%
+%TO.N,GND*%
+X176445000Y-104325000D03*
+%TO.P,U1,13,SDA*%
+%TO.N,Net-(J0-Pad3)*%
+X175175000Y-104325000D03*
+%TO.P,U1,14,RESET*%
+%TO.N,Net-(J0-Pad2)*%
+X173905000Y-104325000D03*
+%TO.P,U1,15,NC*%
+%TO.N,unconnected-(U1-Pad15)*%
+X172635000Y-104325000D03*
+%TO.P,U1,16,SCL*%
+%TO.N,Net-(J0-Pad4)*%
+X171365000Y-104325000D03*
+%TO.P,U1,17,CHANGE*%
+%TO.N,Net-(J0-Pad2)*%
+X170095000Y-104325000D03*
+%TO.P,U1,18,KEY/11/GPO9*%
+%TO.N,Net-(R11-Pad2)*%
+X168825000Y-104325000D03*
+%TO.P,U1,19,KEY10/GPO8*%
+%TO.N,Net-(R10-Pad2)*%
+X167555000Y-104325000D03*
+%TO.P,U1,20,KEY9/GPO7*%
+%TO.N,Net-(R9-Pad2)*%
+X166285000Y-104325000D03*
+D13*
+%TO.P,U1,21*%
+%TO.N,N/C*%
+X172000000Y-109000000D03*
+%TD*%
+D14*
+%TO.P,R14,1*%
+%TO.N,Net-(J0-Pad4)*%
+X182000000Y-110646666D03*
+%TO.P,R14,2*%
+%TO.N,+5V*%
+X184000000Y-110646666D03*
+%TD*%
+D15*
+%TO.P,R4,1*%
+%TO.N,Net-(J2-Pad5)*%
+X143181822Y-109000000D03*
+%TO.P,R4,2*%
+%TO.N,Net-(R4-Pad2)*%
+X143181822Y-111000000D03*
+%TD*%
+D16*
+%TO.P,J1,1,Pin_1*%
+%TO.N,GND*%
+X129000000Y-107500000D03*
+%TO.P,J1,2,Pin_2*%
+%TO.N,Net-(J0-Pad2)*%
+X129000000Y-108500000D03*
+%TO.P,J1,3,Pin_3*%
+%TO.N,Net-(J0-Pad3)*%
+X129000000Y-109500000D03*
+%TO.P,J1,4,Pin_4*%
+%TO.N,Net-(J0-Pad4)*%
+X129000000Y-110500000D03*
+D17*
+%TO.P,J1,MP*%
+%TO.N,N/C*%
+X125125000Y-111800000D03*
+X125125000Y-106200000D03*
+%TD*%
+D18*
+%TO.P,C0,1*%
+%TO.N,+5V*%
+X184000000Y-114000000D03*
+%TO.P,C0,2*%
+%TO.N,GND*%
+X181925000Y-114000000D03*
+%TD*%
+D15*
+%TO.P,R1,1*%
+%TO.N,Net-(J2-Pad2)*%
+X135545460Y-109000000D03*
+%TO.P,R1,2*%
+%TO.N,Net-(R1-Pad2)*%
+X135545460Y-111000000D03*
+%TD*%
+%TO.P,R8,1*%
+%TO.N,Net-(J2-Pad9)*%
+X153363638Y-109000000D03*
+%TO.P,R8,2*%
+%TO.N,Net-(R8-Pad2)*%
+X153363638Y-111000000D03*
+%TD*%
+D19*
+%TO.P,J0,1,Pin_1*%
+%TO.N,GND*%
+X189000000Y-110500000D03*
+%TO.P,J0,2,Pin_2*%
+%TO.N,Net-(J0-Pad2)*%
+X189000000Y-109500000D03*
+%TO.P,J0,3,Pin_3*%
+%TO.N,Net-(J0-Pad3)*%
+X189000000Y-108500000D03*
+%TO.P,J0,4,Pin_4*%
+%TO.N,Net-(J0-Pad4)*%
+X189000000Y-107500000D03*
+D20*
+%TO.P,J0,MP*%
+%TO.N,N/C*%
+X192875000Y-106200000D03*
+X192875000Y-111800000D03*
+%TD*%
+D15*
+%TO.P,R9,1*%
+%TO.N,Net-(J2-Pad10)*%
+X155909092Y-109000000D03*
+%TO.P,R9,2*%
+%TO.N,Net-(R9-Pad2)*%
+X155909092Y-111000000D03*
+%TD*%
+D14*
+%TO.P,R13,1*%
+%TO.N,Net-(J0-Pad3)*%
+X182000000Y-107323333D03*
+%TO.P,R13,2*%
+%TO.N,+5V*%
+X184000000Y-107323333D03*
+%TD*%
+%TO.P,R12,1*%
+%TO.N,Net-(J0-Pad2)*%
+X182000000Y-104000000D03*
+%TO.P,R12,2*%
+%TO.N,+5V*%
+X184000000Y-104000000D03*
+%TD*%
+D15*
+%TO.P,R6,1*%
+%TO.N,Net-(J2-Pad7)*%
+X148272730Y-109000000D03*
+%TO.P,R6,2*%
+%TO.N,Net-(R6-Pad2)*%
+X148272730Y-111000000D03*
+%TD*%
+%TO.P,R5,1*%
+%TO.N,Net-(J2-Pad6)*%
+X145727276Y-109000000D03*
+%TO.P,R5,2*%
+%TO.N,Net-(R5-Pad2)*%
+X145727276Y-111000000D03*
+%TD*%
+%TO.P,R7,1*%
+%TO.N,Net-(J2-Pad8)*%
+X150818184Y-109000000D03*
+%TO.P,R7,2*%
+%TO.N,Net-(R7-Pad2)*%
+X150818184Y-111000000D03*
+%TD*%
+%TO.P,R10,1*%
+%TO.N,Net-(J2-Pad11)*%
+X158454546Y-109000000D03*
+%TO.P,R10,2*%
+%TO.N,Net-(R10-Pad2)*%
+X158454546Y-111000000D03*
+%TD*%
+%TO.P,R2,1*%
+%TO.N,Net-(J2-Pad3)*%
+X138090914Y-109000000D03*
+%TO.P,R2,2*%
+%TO.N,Net-(R2-Pad2)*%
+X138090914Y-111000000D03*
+%TD*%
+%TO.P,R3,1*%
+%TO.N,Net-(J2-Pad4)*%
+X140636368Y-109000000D03*
+%TO.P,R3,2*%
+%TO.N,Net-(R3-Pad2)*%
+X140636368Y-111000000D03*
+%TD*%
+%TO.P,R11,1*%
+%TO.N,Net-(J2-Pad12)*%
+X161000000Y-109000000D03*
+%TO.P,R11,2*%
+%TO.N,Net-(R11-Pad2)*%
+X161000000Y-111000000D03*
+%TD*%
+%TO.P,R0,1*%
+%TO.N,Net-(J2-Pad1)*%
+X133000000Y-109000000D03*
+%TO.P,R0,2*%
+%TO.N,Net-(R0-Pad2)*%
+X133000000Y-111000000D03*
+%TD*%
+M02*

pcb/pcb-F_Mask.gbr

@@ -0,0 +1,176 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:23-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Soldermask,Top*%
+%TF.FilePolarity,Negative*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:23*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 Aperture macros list*
+%AMRoundRect*
+0 Rectangle with rounded corners*
+0 $1 Rounding radius*
+0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
+0 Add a 4 corners polygon primitive as box body*
+4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
+0 Add four circle primitives for the rounded corners*
+1,1,$1+$1,$2,$3*
+1,1,$1+$1,$4,$5*
+1,1,$1+$1,$6,$7*
+1,1,$1+$1,$8,$9*
+0 Add four rect primitives between the rounded corners*
+20,1,$1+$1,$2,$3,$4,$5,0*
+20,1,$1+$1,$4,$5,$6,$7,0*
+20,1,$1+$1,$6,$7,$8,$9,0*
+20,1,$1+$1,$8,$9,$2,$3,0*%
+G04 Aperture macros list end*
+%ADD10R,1.700000X1.700000*%
+%ADD11O,1.700000X1.700000*%
+%ADD12RoundRect,0.250001X1.984999X-1.529999X1.984999X1.529999X-1.984999X1.529999X-1.984999X-1.529999X0*%
+%ADD13RoundRect,0.150000X0.150000X-0.850000X0.150000X0.850000X-0.150000X0.850000X-0.150000X-0.850000X0*%
+%ADD14RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
+%ADD15RoundRect,0.250000X-0.450000X0.350000X-0.450000X-0.350000X0.450000X-0.350000X0.450000X0.350000X0*%
+%ADD16RoundRect,0.150000X-0.625000X0.150000X-0.625000X-0.150000X0.625000X-0.150000X0.625000X0.150000X0*%
+%ADD17RoundRect,0.250000X-0.650000X0.350000X-0.650000X-0.350000X0.650000X-0.350000X0.650000X0.350000X0*%
+%ADD18RoundRect,0.250000X0.337500X0.475000X-0.337500X0.475000X-0.337500X-0.475000X0.337500X-0.475000X0*%
+%ADD19RoundRect,0.150000X0.625000X-0.150000X0.625000X0.150000X-0.625000X0.150000X-0.625000X-0.150000X0*%
+%ADD20RoundRect,0.250000X0.650000X-0.350000X0.650000X0.350000X-0.650000X0.350000X-0.650000X-0.350000X0*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,J2*%
+X133140000Y-105000000D03*
+D11*
+X135680000Y-105000000D03*
+X138220000Y-105000000D03*
+X140760000Y-105000000D03*
+X143300000Y-105000000D03*
+X145840000Y-105000000D03*
+X148380000Y-105000000D03*
+X150920000Y-105000000D03*
+X153460000Y-105000000D03*
+X156000000Y-105000000D03*
+X158540000Y-105000000D03*
+X161080000Y-105000000D03*
+%TD*%
+D12*
+%TO.C,U1*%
+X172000000Y-109000000D03*
+D13*
+X166285000Y-113675000D03*
+X167555000Y-113675000D03*
+X168825000Y-113675000D03*
+X170095000Y-113675000D03*
+X171365000Y-113675000D03*
+X172635000Y-113675000D03*
+X173905000Y-113675000D03*
+X175175000Y-113675000D03*
+X176445000Y-113675000D03*
+X177715000Y-113675000D03*
+X177715000Y-104325000D03*
+X176445000Y-104325000D03*
+X175175000Y-104325000D03*
+X173905000Y-104325000D03*
+X172635000Y-104325000D03*
+X171365000Y-104325000D03*
+X170095000Y-104325000D03*
+X168825000Y-104325000D03*
+X167555000Y-104325000D03*
+X166285000Y-104325000D03*
+%TD*%
+D14*
+%TO.C,R14*%
+X182000000Y-110646666D03*
+X184000000Y-110646666D03*
+%TD*%
+D15*
+%TO.C,R4*%
+X143181822Y-109000000D03*
+X143181822Y-111000000D03*
+%TD*%
+D16*
+%TO.C,J1*%
+X129000000Y-107500000D03*
+X129000000Y-108500000D03*
+X129000000Y-109500000D03*
+X129000000Y-110500000D03*
+D17*
+X125125000Y-111800000D03*
+X125125000Y-106200000D03*
+%TD*%
+D18*
+%TO.C,C0*%
+X184000000Y-114000000D03*
+X181925000Y-114000000D03*
+%TD*%
+D15*
+%TO.C,R1*%
+X135545460Y-109000000D03*
+X135545460Y-111000000D03*
+%TD*%
+%TO.C,R8*%
+X153363638Y-109000000D03*
+X153363638Y-111000000D03*
+%TD*%
+D19*
+%TO.C,J0*%
+X189000000Y-110500000D03*
+X189000000Y-109500000D03*
+X189000000Y-108500000D03*
+X189000000Y-107500000D03*
+D20*
+X192875000Y-106200000D03*
+X192875000Y-111800000D03*
+%TD*%
+D15*
+%TO.C,R9*%
+X155909092Y-109000000D03*
+X155909092Y-111000000D03*
+%TD*%
+D14*
+%TO.C,R13*%
+X182000000Y-107323333D03*
+X184000000Y-107323333D03*
+%TD*%
+%TO.C,R12*%
+X182000000Y-104000000D03*
+X184000000Y-104000000D03*
+%TD*%
+D15*
+%TO.C,R6*%
+X148272730Y-109000000D03*
+X148272730Y-111000000D03*
+%TD*%
+%TO.C,R5*%
+X145727276Y-109000000D03*
+X145727276Y-111000000D03*
+%TD*%
+%TO.C,R7*%
+X150818184Y-109000000D03*
+X150818184Y-111000000D03*
+%TD*%
+%TO.C,R10*%
+X158454546Y-109000000D03*
+X158454546Y-111000000D03*
+%TD*%
+%TO.C,R2*%
+X138090914Y-109000000D03*
+X138090914Y-111000000D03*
+%TD*%
+%TO.C,R3*%
+X140636368Y-109000000D03*
+X140636368Y-111000000D03*
+%TD*%
+%TO.C,R11*%
+X161000000Y-109000000D03*
+X161000000Y-111000000D03*
+%TD*%
+%TO.C,R0*%
+X133000000Y-109000000D03*
+X133000000Y-111000000D03*
+%TD*%
+M02*

pcb/pcb-F_Paste.gbr

@@ -0,0 +1,158 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:21-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Paste,Top*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:21*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 Aperture macros list*
+%AMRoundRect*
+0 Rectangle with rounded corners*
+0 $1 Rounding radius*
+0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
+0 Add a 4 corners polygon primitive as box body*
+4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
+0 Add four circle primitives for the rounded corners*
+1,1,$1+$1,$2,$3*
+1,1,$1+$1,$4,$5*
+1,1,$1+$1,$6,$7*
+1,1,$1+$1,$8,$9*
+0 Add four rect primitives between the rounded corners*
+20,1,$1+$1,$2,$3,$4,$5,0*
+20,1,$1+$1,$4,$5,$6,$7,0*
+20,1,$1+$1,$6,$7,$8,$9,0*
+20,1,$1+$1,$8,$9,$2,$3,0*%
+G04 Aperture macros list end*
+%ADD10RoundRect,0.250000X1.550000X-1.185000X1.550000X1.185000X-1.550000X1.185000X-1.550000X-1.185000X0*%
+%ADD11RoundRect,0.150000X0.150000X-0.850000X0.150000X0.850000X-0.150000X0.850000X-0.150000X-0.850000X0*%
+%ADD12RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
+%ADD13RoundRect,0.250000X-0.450000X0.350000X-0.450000X-0.350000X0.450000X-0.350000X0.450000X0.350000X0*%
+%ADD14RoundRect,0.150000X-0.625000X0.150000X-0.625000X-0.150000X0.625000X-0.150000X0.625000X0.150000X0*%
+%ADD15RoundRect,0.250000X-0.650000X0.350000X-0.650000X-0.350000X0.650000X-0.350000X0.650000X0.350000X0*%
+%ADD16RoundRect,0.250000X0.337500X0.475000X-0.337500X0.475000X-0.337500X-0.475000X0.337500X-0.475000X0*%
+%ADD17RoundRect,0.150000X0.625000X-0.150000X0.625000X0.150000X-0.625000X0.150000X-0.625000X-0.150000X0*%
+%ADD18RoundRect,0.250000X0.650000X-0.350000X0.650000X0.350000X-0.650000X0.350000X-0.650000X-0.350000X0*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,U1*%
+X172000000Y-109000000D03*
+D11*
+X166285000Y-113675000D03*
+X167555000Y-113675000D03*
+X168825000Y-113675000D03*
+X170095000Y-113675000D03*
+X171365000Y-113675000D03*
+X172635000Y-113675000D03*
+X173905000Y-113675000D03*
+X175175000Y-113675000D03*
+X176445000Y-113675000D03*
+X177715000Y-113675000D03*
+X177715000Y-104325000D03*
+X176445000Y-104325000D03*
+X175175000Y-104325000D03*
+X173905000Y-104325000D03*
+X172635000Y-104325000D03*
+X171365000Y-104325000D03*
+X170095000Y-104325000D03*
+X168825000Y-104325000D03*
+X167555000Y-104325000D03*
+X166285000Y-104325000D03*
+%TD*%
+D12*
+%TO.C,R14*%
+X182000000Y-110646666D03*
+X184000000Y-110646666D03*
+%TD*%
+D13*
+%TO.C,R4*%
+X143181822Y-109000000D03*
+X143181822Y-111000000D03*
+%TD*%
+D14*
+%TO.C,J1*%
+X129000000Y-107500000D03*
+X129000000Y-108500000D03*
+X129000000Y-109500000D03*
+X129000000Y-110500000D03*
+D15*
+X125125000Y-111800000D03*
+X125125000Y-106200000D03*
+%TD*%
+D16*
+%TO.C,C0*%
+X184000000Y-114000000D03*
+X181925000Y-114000000D03*
+%TD*%
+D13*
+%TO.C,R1*%
+X135545460Y-109000000D03*
+X135545460Y-111000000D03*
+%TD*%
+%TO.C,R8*%
+X153363638Y-109000000D03*
+X153363638Y-111000000D03*
+%TD*%
+D17*
+%TO.C,J0*%
+X189000000Y-110500000D03*
+X189000000Y-109500000D03*
+X189000000Y-108500000D03*
+X189000000Y-107500000D03*
+D18*
+X192875000Y-106200000D03*
+X192875000Y-111800000D03*
+%TD*%
+D13*
+%TO.C,R9*%
+X155909092Y-109000000D03*
+X155909092Y-111000000D03*
+%TD*%
+D12*
+%TO.C,R13*%
+X182000000Y-107323333D03*
+X184000000Y-107323333D03*
+%TD*%
+%TO.C,R12*%
+X182000000Y-104000000D03*
+X184000000Y-104000000D03*
+%TD*%
+D13*
+%TO.C,R6*%
+X148272730Y-109000000D03*
+X148272730Y-111000000D03*
+%TD*%
+%TO.C,R5*%
+X145727276Y-109000000D03*
+X145727276Y-111000000D03*
+%TD*%
+%TO.C,R7*%
+X150818184Y-109000000D03*
+X150818184Y-111000000D03*
+%TD*%
+%TO.C,R10*%
+X158454546Y-109000000D03*
+X158454546Y-111000000D03*
+%TD*%
+%TO.C,R2*%
+X138090914Y-109000000D03*
+X138090914Y-111000000D03*
+%TD*%
+%TO.C,R3*%
+X140636368Y-109000000D03*
+X140636368Y-111000000D03*
+%TD*%
+%TO.C,R11*%
+X161000000Y-109000000D03*
+X161000000Y-111000000D03*
+%TD*%
+%TO.C,R0*%
+X133000000Y-109000000D03*
+X133000000Y-111000000D03*
+%TD*%
+M02*

pcb/pcb-F_Silkscreen.gbr

@@ -0,0 +1,730 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,6.0.4*%
+%TF.CreationDate,2022-04-30T16:21:22-07:00*%
+%TF.ProjectId,pcb,7063622e-6b69-4636-9164-5f7063625858,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Legend,Top*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 6.0.4) date 2022-04-30 16:21:22*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10C,0.150000*%
+%ADD11C,0.120000*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,J2*%
+X130262380Y-104333333D02*
+X130976666Y-104333333D01*
+X131119523Y-104380952D01*
+X131214761Y-104476190D01*
+X131262380Y-104619047D01*
+X131262380Y-104714285D01*
+X130357619Y-103904761D02*
+X130310000Y-103857142D01*
+X130262380Y-103761904D01*
+X130262380Y-103523809D01*
+X130310000Y-103428571D01*
+X130357619Y-103380952D01*
+X130452857Y-103333333D01*
+X130548095Y-103333333D01*
+X130690952Y-103380952D01*
+X131262380Y-103952380D01*
+X131262380Y-103333333D01*
+%TO.C,U1*%
+X164092380Y-106761904D02*
+X164901904Y-106761904D01*
+X164997142Y-106714285D01*
+X165044761Y-106666666D01*
+X165092380Y-106571428D01*
+X165092380Y-106380952D01*
+X165044761Y-106285714D01*
+X164997142Y-106238095D01*
+X164901904Y-106190476D01*
+X164092380Y-106190476D01*
+X165092380Y-105190476D02*
+X165092380Y-105761904D01*
+X165092380Y-105476190D02*
+X164092380Y-105476190D01*
+X164235238Y-105571428D01*
+X164330476Y-105666666D01*
+X164378095Y-105761904D01*
+%TO.C,R14*%
+X185357142Y-111834046D02*
+X185023809Y-111357856D01*
+X184785714Y-111834046D02*
+X184785714Y-110834046D01*
+X185166666Y-110834046D01*
+X185261904Y-110881666D01*
+X185309523Y-110929285D01*
+X185357142Y-111024523D01*
+X185357142Y-111167380D01*
+X185309523Y-111262618D01*
+X185261904Y-111310237D01*
+X185166666Y-111357856D01*
+X184785714Y-111357856D01*
+X186309523Y-111834046D02*
+X185738095Y-111834046D01*
+X186023809Y-111834046D02*
+X186023809Y-110834046D01*
+X185928571Y-110976904D01*
+X185833333Y-111072142D01*
+X185738095Y-111119761D01*
+X187166666Y-111167380D02*
+X187166666Y-111834046D01*
+X186928571Y-110786427D02*
+X186690476Y-111500713D01*
+X187309523Y-111500713D01*
+%TO.C,R4*%
+X143634202Y-113166666D02*
+X143158012Y-113500000D01*
+X143634202Y-113738095D02*
+X142634202Y-113738095D01*
+X142634202Y-113357142D01*
+X142681822Y-113261904D01*
+X142729441Y-113214285D01*
+X142824679Y-113166666D01*
+X142967536Y-113166666D01*
+X143062774Y-113214285D01*
+X143110393Y-113261904D01*
+X143158012Y-113357142D01*
+X143158012Y-113738095D01*
+X142967536Y-112309523D02*
+X143634202Y-112309523D01*
+X142586583Y-112547619D02*
+X143300869Y-112785714D01*
+X143300869Y-112166666D01*
+%TO.C,J1*%
+X124452380Y-104333333D02*
+X125166666Y-104333333D01*
+X125309523Y-104380952D01*
+X125404761Y-104476190D01*
+X125452380Y-104619047D01*
+X125452380Y-104714285D01*
+X125452380Y-103333333D02*
+X125452380Y-103904761D01*
+X125452380Y-103619047D02*
+X124452380Y-103619047D01*
+X124595238Y-103714285D01*
+X124690476Y-103809523D01*
+X124738095Y-103904761D01*
+%TO.C,C0*%
+X185833333Y-115357142D02*
+X185785714Y-115404761D01*
+X185642857Y-115452380D01*
+X185547619Y-115452380D01*
+X185404761Y-115404761D01*
+X185309523Y-115309523D01*
+X185261904Y-115214285D01*
+X185214285Y-115023809D01*
+X185214285Y-114880952D01*
+X185261904Y-114690476D01*
+X185309523Y-114595238D01*
+X185404761Y-114500000D01*
+X185547619Y-114452380D01*
+X185642857Y-114452380D01*
+X185785714Y-114500000D01*
+X185833333Y-114547619D01*
+X186452380Y-114452380D02*
+X186547619Y-114452380D01*
+X186642857Y-114500000D01*
+X186690476Y-114547619D01*
+X186738095Y-114642857D01*
+X186785714Y-114833333D01*
+X186785714Y-115071428D01*
+X186738095Y-115261904D01*
+X186690476Y-115357142D01*
+X186642857Y-115404761D01*
+X186547619Y-115452380D01*
+X186452380Y-115452380D01*
+X186357142Y-115404761D01*
+X186309523Y-115357142D01*
+X186261904Y-115261904D01*
+X186214285Y-115071428D01*
+X186214285Y-114833333D01*
+X186261904Y-114642857D01*
+X186309523Y-114547619D01*
+X186357142Y-114500000D01*
+X186452380Y-114452380D01*
+%TO.C,R1*%
+X135997840Y-113166666D02*
+X135521650Y-113500000D01*
+X135997840Y-113738095D02*
+X134997840Y-113738095D01*
+X134997840Y-113357142D01*
+X135045460Y-113261904D01*
+X135093079Y-113214285D01*
+X135188317Y-113166666D01*
+X135331174Y-113166666D01*
+X135426412Y-113214285D01*
+X135474031Y-113261904D01*
+X135521650Y-113357142D01*
+X135521650Y-113738095D01*
+X135997840Y-112214285D02*
+X135997840Y-112785714D01*
+X135997840Y-112500000D02*
+X134997840Y-112500000D01*
+X135140698Y-112595238D01*
+X135235936Y-112690476D01*
+X135283555Y-112785714D01*
+%TO.C,R8*%
+X153816018Y-113166666D02*
+X153339828Y-113500000D01*
+X153816018Y-113738095D02*
+X152816018Y-113738095D01*
+X152816018Y-113357142D01*
+X152863638Y-113261904D01*
+X152911257Y-113214285D01*
+X153006495Y-113166666D01*
+X153149352Y-113166666D01*
+X153244590Y-113214285D01*
+X153292209Y-113261904D01*
+X153339828Y-113357142D01*
+X153339828Y-113738095D01*
+X153244590Y-112595238D02*
+X153196971Y-112690476D01*
+X153149352Y-112738095D01*
+X153054114Y-112785714D01*
+X153006495Y-112785714D01*
+X152911257Y-112738095D01*
+X152863638Y-112690476D01*
+X152816018Y-112595238D01*
+X152816018Y-112404761D01*
+X152863638Y-112309523D01*
+X152911257Y-112261904D01*
+X153006495Y-112214285D01*
+X153054114Y-112214285D01*
+X153149352Y-112261904D01*
+X153196971Y-112309523D01*
+X153244590Y-112404761D01*
+X153244590Y-112595238D01*
+X153292209Y-112690476D01*
+X153339828Y-112738095D01*
+X153435066Y-112785714D01*
+X153625542Y-112785714D01*
+X153720780Y-112738095D01*
+X153768399Y-112690476D01*
+X153816018Y-112595238D01*
+X153816018Y-112404761D01*
+X153768399Y-112309523D01*
+X153720780Y-112261904D01*
+X153625542Y-112214285D01*
+X153435066Y-112214285D01*
+X153339828Y-112261904D01*
+X153292209Y-112309523D01*
+X153244590Y-112404761D01*
+%TO.C,J0*%
+X192452380Y-114333333D02*
+X193166666Y-114333333D01*
+X193309523Y-114380952D01*
+X193404761Y-114476190D01*
+X193452380Y-114619047D01*
+X193452380Y-114714285D01*
+X192452380Y-113666666D02*
+X192452380Y-113571428D01*
+X192500000Y-113476190D01*
+X192547619Y-113428571D01*
+X192642857Y-113380952D01*
+X192833333Y-113333333D01*
+X193071428Y-113333333D01*
+X193261904Y-113380952D01*
+X193357142Y-113428571D01*
+X193404761Y-113476190D01*
+X193452380Y-113571428D01*
+X193452380Y-113666666D01*
+X193404761Y-113761904D01*
+X193357142Y-113809523D01*
+X193261904Y-113857142D01*
+X193071428Y-113904761D01*
+X192833333Y-113904761D01*
+X192642857Y-113857142D01*
+X192547619Y-113809523D01*
+X192500000Y-113761904D01*
+X192452380Y-113666666D01*
+%TO.C,R9*%
+X156361472Y-113166666D02*
+X155885282Y-113500000D01*
+X156361472Y-113738095D02*
+X155361472Y-113738095D01*
+X155361472Y-113357142D01*
+X155409092Y-113261904D01*
+X155456711Y-113214285D01*
+X155551949Y-113166666D01*
+X155694806Y-113166666D01*
+X155790044Y-113214285D01*
+X155837663Y-113261904D01*
+X155885282Y-113357142D01*
+X155885282Y-113738095D01*
+X156361472Y-112690476D02*
+X156361472Y-112500000D01*
+X156313853Y-112404761D01*
+X156266234Y-112357142D01*
+X156123377Y-112261904D01*
+X155932901Y-112214285D01*
+X155551949Y-112214285D01*
+X155456711Y-112261904D01*
+X155409092Y-112309523D01*
+X155361472Y-112404761D01*
+X155361472Y-112595238D01*
+X155409092Y-112690476D01*
+X155456711Y-112738095D01*
+X155551949Y-112785714D01*
+X155790044Y-112785714D01*
+X155885282Y-112738095D01*
+X155932901Y-112690476D01*
+X155980520Y-112595238D01*
+X155980520Y-112404761D01*
+X155932901Y-112309523D01*
+X155885282Y-112261904D01*
+X155790044Y-112214285D01*
+%TO.C,R13*%
+X185357142Y-108775713D02*
+X185023809Y-108299523D01*
+X184785714Y-108775713D02*
+X184785714Y-107775713D01*
+X185166666Y-107775713D01*
+X185261904Y-107823333D01*
+X185309523Y-107870952D01*
+X185357142Y-107966190D01*
+X185357142Y-108109047D01*
+X185309523Y-108204285D01*
+X185261904Y-108251904D01*
+X185166666Y-108299523D01*
+X184785714Y-108299523D01*
+X186309523Y-108775713D02*
+X185738095Y-108775713D01*
+X186023809Y-108775713D02*
+X186023809Y-107775713D01*
+X185928571Y-107918571D01*
+X185833333Y-108013809D01*
+X185738095Y-108061428D01*
+X186642857Y-107775713D02*
+X187261904Y-107775713D01*
+X186928571Y-108156666D01*
+X187071428Y-108156666D01*
+X187166666Y-108204285D01*
+X187214285Y-108251904D01*
+X187261904Y-108347142D01*
+X187261904Y-108585237D01*
+X187214285Y-108680475D01*
+X187166666Y-108728094D01*
+X187071428Y-108775713D01*
+X186785714Y-108775713D01*
+X186690476Y-108728094D01*
+X186642857Y-108680475D01*
+%TO.C,R12*%
+X185357142Y-105452380D02*
+X185023809Y-104976190D01*
+X184785714Y-105452380D02*
+X184785714Y-104452380D01*
+X185166666Y-104452380D01*
+X185261904Y-104500000D01*
+X185309523Y-104547619D01*
+X185357142Y-104642857D01*
+X185357142Y-104785714D01*
+X185309523Y-104880952D01*
+X185261904Y-104928571D01*
+X185166666Y-104976190D01*
+X184785714Y-104976190D01*
+X186309523Y-105452380D02*
+X185738095Y-105452380D01*
+X186023809Y-105452380D02*
+X186023809Y-104452380D01*
+X185928571Y-104595238D01*
+X185833333Y-104690476D01*
+X185738095Y-104738095D01*
+X186690476Y-104547619D02*
+X186738095Y-104500000D01*
+X186833333Y-104452380D01*
+X187071428Y-104452380D01*
+X187166666Y-104500000D01*
+X187214285Y-104547619D01*
+X187261904Y-104642857D01*
+X187261904Y-104738095D01*
+X187214285Y-104880952D01*
+X186642857Y-105452380D01*
+X187261904Y-105452380D01*
+%TO.C,R6*%
+X148725110Y-113166666D02*
+X148248920Y-113500000D01*
+X148725110Y-113738095D02*
+X147725110Y-113738095D01*
+X147725110Y-113357142D01*
+X147772730Y-113261904D01*
+X147820349Y-113214285D01*
+X147915587Y-113166666D01*
+X148058444Y-113166666D01*
+X148153682Y-113214285D01*
+X148201301Y-113261904D01*
+X148248920Y-113357142D01*
+X148248920Y-113738095D01*
+X147725110Y-112309523D02*
+X147725110Y-112500000D01*
+X147772730Y-112595238D01*
+X147820349Y-112642857D01*
+X147963206Y-112738095D01*
+X148153682Y-112785714D01*
+X148534634Y-112785714D01*
+X148629872Y-112738095D01*
+X148677491Y-112690476D01*
+X148725110Y-112595238D01*
+X148725110Y-112404761D01*
+X148677491Y-112309523D01*
+X148629872Y-112261904D01*
+X148534634Y-112214285D01*
+X148296539Y-112214285D01*
+X148201301Y-112261904D01*
+X148153682Y-112309523D01*
+X148106063Y-112404761D01*
+X148106063Y-112595238D01*
+X148153682Y-112690476D01*
+X148201301Y-112738095D01*
+X148296539Y-112785714D01*
+%TO.C,R5*%
+X146179656Y-113166666D02*
+X145703466Y-113500000D01*
+X146179656Y-113738095D02*
+X145179656Y-113738095D01*
+X145179656Y-113357142D01*
+X145227276Y-113261904D01*
+X145274895Y-113214285D01*
+X145370133Y-113166666D01*
+X145512990Y-113166666D01*
+X145608228Y-113214285D01*
+X145655847Y-113261904D01*
+X145703466Y-113357142D01*
+X145703466Y-113738095D01*
+X145179656Y-112261904D02*
+X145179656Y-112738095D01*
+X145655847Y-112785714D01*
+X145608228Y-112738095D01*
+X145560609Y-112642857D01*
+X145560609Y-112404761D01*
+X145608228Y-112309523D01*
+X145655847Y-112261904D01*
+X145751085Y-112214285D01*
+X145989180Y-112214285D01*
+X146084418Y-112261904D01*
+X146132037Y-112309523D01*
+X146179656Y-112404761D01*
+X146179656Y-112642857D01*
+X146132037Y-112738095D01*
+X146084418Y-112785714D01*
+%TO.C,R7*%
+X151270564Y-113166666D02*
+X150794374Y-113500000D01*
+X151270564Y-113738095D02*
+X150270564Y-113738095D01*
+X150270564Y-113357142D01*
+X150318184Y-113261904D01*
+X150365803Y-113214285D01*
+X150461041Y-113166666D01*
+X150603898Y-113166666D01*
+X150699136Y-113214285D01*
+X150746755Y-113261904D01*
+X150794374Y-113357142D01*
+X150794374Y-113738095D01*
+X150270564Y-112833333D02*
+X150270564Y-112166666D01*
+X151270564Y-112595238D01*
+%TO.C,R10*%
+X158906926Y-114119048D02*
+X158430736Y-114452381D01*
+X158906926Y-114690476D02*
+X157906926Y-114690476D01*
+X157906926Y-114309524D01*
+X157954546Y-114214286D01*
+X158002165Y-114166667D01*
+X158097403Y-114119048D01*
+X158240260Y-114119048D01*
+X158335498Y-114166667D01*
+X158383117Y-114214286D01*
+X158430736Y-114309524D01*
+X158430736Y-114690476D01*
+X158906926Y-113166667D02*
+X158906926Y-113738095D01*
+X158906926Y-113452381D02*
+X157906926Y-113452381D01*
+X158049784Y-113547619D01*
+X158145022Y-113642857D01*
+X158192641Y-113738095D01*
+X157906926Y-112547619D02*
+X157906926Y-112452381D01*
+X157954546Y-112357143D01*
+X158002165Y-112309524D01*
+X158097403Y-112261905D01*
+X158287879Y-112214286D01*
+X158525974Y-112214286D01*
+X158716450Y-112261905D01*
+X158811688Y-112309524D01*
+X158859307Y-112357143D01*
+X158906926Y-112452381D01*
+X158906926Y-112547619D01*
+X158859307Y-112642857D01*
+X158811688Y-112690476D01*
+X158716450Y-112738095D01*
+X158525974Y-112785714D01*
+X158287879Y-112785714D01*
+X158097403Y-112738095D01*
+X158002165Y-112690476D01*
+X157954546Y-112642857D01*
+X157906926Y-112547619D01*
+%TO.C,R2*%
+X138543294Y-113166666D02*
+X138067104Y-113500000D01*
+X138543294Y-113738095D02*
+X137543294Y-113738095D01*
+X137543294Y-113357142D01*
+X137590914Y-113261904D01*
+X137638533Y-113214285D01*
+X137733771Y-113166666D01*
+X137876628Y-113166666D01*
+X137971866Y-113214285D01*
+X138019485Y-113261904D01*
+X138067104Y-113357142D01*
+X138067104Y-113738095D01*
+X137638533Y-112785714D02*
+X137590914Y-112738095D01*
+X137543294Y-112642857D01*
+X137543294Y-112404761D01*
+X137590914Y-112309523D01*
+X137638533Y-112261904D01*
+X137733771Y-112214285D01*
+X137829009Y-112214285D01*
+X137971866Y-112261904D01*
+X138543294Y-112833333D01*
+X138543294Y-112214285D01*
+%TO.C,R3*%
+X141088748Y-113166666D02*
+X140612558Y-113500000D01*
+X141088748Y-113738095D02*
+X140088748Y-113738095D01*
+X140088748Y-113357142D01*
+X140136368Y-113261904D01*
+X140183987Y-113214285D01*
+X140279225Y-113166666D01*
+X140422082Y-113166666D01*
+X140517320Y-113214285D01*
+X140564939Y-113261904D01*
+X140612558Y-113357142D01*
+X140612558Y-113738095D01*
+X140088748Y-112833333D02*
+X140088748Y-112214285D01*
+X140469701Y-112547619D01*
+X140469701Y-112404761D01*
+X140517320Y-112309523D01*
+X140564939Y-112261904D01*
+X140660177Y-112214285D01*
+X140898272Y-112214285D01*
+X140993510Y-112261904D01*
+X141041129Y-112309523D01*
+X141088748Y-112404761D01*
+X141088748Y-112690476D01*
+X141041129Y-112785714D01*
+X140993510Y-112833333D01*
+%TO.C,R11*%
+X161452380Y-114119048D02*
+X160976190Y-114452381D01*
+X161452380Y-114690476D02*
+X160452380Y-114690476D01*
+X160452380Y-114309524D01*
+X160500000Y-114214286D01*
+X160547619Y-114166667D01*
+X160642857Y-114119048D01*
+X160785714Y-114119048D01*
+X160880952Y-114166667D01*
+X160928571Y-114214286D01*
+X160976190Y-114309524D01*
+X160976190Y-114690476D01*
+X161452380Y-113166667D02*
+X161452380Y-113738095D01*
+X161452380Y-113452381D02*
+X160452380Y-113452381D01*
+X160595238Y-113547619D01*
+X160690476Y-113642857D01*
+X160738095Y-113738095D01*
+X161452380Y-112214286D02*
+X161452380Y-112785714D01*
+X161452380Y-112500000D02*
+X160452380Y-112500000D01*
+X160595238Y-112595238D01*
+X160690476Y-112690476D01*
+X160738095Y-112785714D01*
+%TO.C,R0*%
+X133452380Y-113166666D02*
+X132976190Y-113500000D01*
+X133452380Y-113738095D02*
+X132452380Y-113738095D01*
+X132452380Y-113357142D01*
+X132500000Y-113261904D01*
+X132547619Y-113214285D01*
+X132642857Y-113166666D01*
+X132785714Y-113166666D01*
+X132880952Y-113214285D01*
+X132928571Y-113261904D01*
+X132976190Y-113357142D01*
+X132976190Y-113738095D01*
+X132452380Y-112547619D02*
+X132452380Y-112452380D01*
+X132500000Y-112357142D01*
+X132547619Y-112309523D01*
+X132642857Y-112261904D01*
+X132833333Y-112214285D01*
+X133071428Y-112214285D01*
+X133261904Y-112261904D01*
+X133357142Y-112309523D01*
+X133404761Y-112357142D01*
+X133452380Y-112452380D01*
+X133452380Y-112547619D01*
+X133404761Y-112642857D01*
+X133357142Y-112690476D01*
+X133261904Y-112738095D01*
+X133071428Y-112785714D01*
+X132833333Y-112785714D01*
+X132642857Y-112738095D01*
+X132547619Y-112690476D01*
+X132500000Y-112642857D01*
+X132452380Y-112547619D01*
+D11*
+%TO.C,J2*%
+X134410000Y-103670000D02*
+X162410000Y-103670000D01*
+X133140000Y-106330000D02*
+X131810000Y-106330000D01*
+X162410000Y-106330000D02*
+X162410000Y-103670000D01*
+X134410000Y-106330000D02*
+X162410000Y-106330000D01*
+X131810000Y-106330000D02*
+X131810000Y-105000000D01*
+X134410000Y-106330000D02*
+X134410000Y-103670000D01*
+%TO.C,U1*%
+X178522500Y-109000000D02*
+X178522500Y-112870000D01*
+X165725000Y-112870000D02*
+X165725000Y-114675000D01*
+X165477500Y-109000000D02*
+X165477500Y-105130000D01*
+X178522500Y-105130000D02*
+X178275000Y-105130000D01*
+X165477500Y-112870000D02*
+X165725000Y-112870000D01*
+X178522500Y-112870000D02*
+X178275000Y-112870000D01*
+X165477500Y-105130000D02*
+X165725000Y-105130000D01*
+X165477500Y-109000000D02*
+X165477500Y-112870000D01*
+X178522500Y-109000000D02*
+X178522500Y-105130000D01*
+%TO.C,R14*%
+X182772936Y-111381666D02*
+X183227064Y-111381666D01*
+X182772936Y-109911666D02*
+X183227064Y-109911666D01*
+%TO.C,R4*%
+X143916822Y-109772936D02*
+X143916822Y-110227064D01*
+X142446822Y-109772936D02*
+X142446822Y-110227064D01*
+%TO.C,J1*%
+X126285000Y-105890000D02*
+X128785000Y-105890000D01*
+X128785000Y-106940000D02*
+X129775000Y-106940000D01*
+X128785000Y-105890000D02*
+X128785000Y-106940000D01*
+X124315000Y-107060000D02*
+X124315000Y-110940000D01*
+X126285000Y-112110000D02*
+X128785000Y-112110000D01*
+X128785000Y-112110000D02*
+X128785000Y-111060000D01*
+%TO.C,C0*%
+X183223752Y-113265000D02*
+X182701248Y-113265000D01*
+X183223752Y-114735000D02*
+X182701248Y-114735000D01*
+%TO.C,R1*%
+X136280460Y-109772936D02*
+X136280460Y-110227064D01*
+X134810460Y-109772936D02*
+X134810460Y-110227064D01*
+%TO.C,R8*%
+X152628638Y-109772936D02*
+X152628638Y-110227064D01*
+X154098638Y-109772936D02*
+X154098638Y-110227064D01*
+%TO.C,J0*%
+X193685000Y-110940000D02*
+X193685000Y-107060000D01*
+X191715000Y-112110000D02*
+X189215000Y-112110000D01*
+X191715000Y-105890000D02*
+X189215000Y-105890000D01*
+X189215000Y-111060000D02*
+X188225000Y-111060000D01*
+X189215000Y-112110000D02*
+X189215000Y-111060000D01*
+X189215000Y-105890000D02*
+X189215000Y-106940000D01*
+%TO.C,R9*%
+X156644092Y-109772936D02*
+X156644092Y-110227064D01*
+X155174092Y-109772936D02*
+X155174092Y-110227064D01*
+%TO.C,R13*%
+X182772936Y-106588333D02*
+X183227064Y-106588333D01*
+X182772936Y-108058333D02*
+X183227064Y-108058333D01*
+%TO.C,R12*%
+X182772936Y-104735000D02*
+X183227064Y-104735000D01*
+X182772936Y-103265000D02*
+X183227064Y-103265000D01*
+%TO.C,R6*%
+X149007730Y-109772936D02*
+X149007730Y-110227064D01*
+X147537730Y-109772936D02*
+X147537730Y-110227064D01*
+%TO.C,R5*%
+X144992276Y-109772936D02*
+X144992276Y-110227064D01*
+X146462276Y-109772936D02*
+X146462276Y-110227064D01*
+%TO.C,R7*%
+X151553184Y-109772936D02*
+X151553184Y-110227064D01*
+X150083184Y-109772936D02*
+X150083184Y-110227064D01*
+%TO.C,R10*%
+X157719546Y-109772936D02*
+X157719546Y-110227064D01*
+X159189546Y-109772936D02*
+X159189546Y-110227064D01*
+%TO.C,R2*%
+X137355914Y-109772936D02*
+X137355914Y-110227064D01*
+X138825914Y-109772936D02*
+X138825914Y-110227064D01*
+%TO.C,R3*%
+X139901368Y-109772936D02*
+X139901368Y-110227064D01*
+X141371368Y-109772936D02*
+X141371368Y-110227064D01*
+%TO.C,R11*%
+X161735000Y-109772936D02*
+X161735000Y-110227064D01*
+X160265000Y-109772936D02*
+X160265000Y-110227064D01*
+%TO.C,R0*%
+X132265000Y-109772936D02*
+X132265000Y-110227064D01*
+X133735000Y-109772936D02*
+X133735000Y-110227064D01*
+%TD*%
+M02*

pcb/pcb-job.gbrjob

@@ -0,0 +1,119 @@
+{
+  "Header": {
+    "GenerationSoftware": {
+      "Vendor": "KiCad",
+      "Application": "Pcbnew",
+      "Version": "6.0.4"
+    },
+    "CreationDate": "2022-04-30T16:21:24-07:00"
+  },
+  "GeneralSpecs": {
+    "ProjectId": {
+      "Name": "pcb",
+      "GUID": "7063622e-6b69-4636-9164-5f7063625858",
+      "Revision": "rev?"
+    },
+    "Size": {
+      "X": 74.1,
+      "Y": 14.1
+    },
+    "LayerNumber": 2,
+    "BoardThickness": 1.6,
+    "Finish": "None"
+  },
+  "DesignRules": [
+    {
+      "Layers": "Outer",
+      "PadToPad": 0.0,
+      "PadToTrack": 0.0,
+      "TrackToTrack": 0.2
+    }
+  ],
+  "FilesAttributes": [
+    {
+      "Path": "pcb-F_Cu.gbr",
+      "FileFunction": "Copper,L1,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "pcb-B_Cu.gbr",
+      "FileFunction": "Copper,L2,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "pcb-F_Paste.gbr",
+      "FileFunction": "SolderPaste,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "pcb-B_Paste.gbr",
+      "FileFunction": "SolderPaste,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "pcb-F_Silkscreen.gbr",
+      "FileFunction": "Legend,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "pcb-B_Silkscreen.gbr",
+      "FileFunction": "Legend,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "pcb-F_Mask.gbr",
+      "FileFunction": "SolderMask,Top",
+      "FilePolarity": "Negative"
+    },
+    {
+      "Path": "pcb-B_Mask.gbr",
+      "FileFunction": "SolderMask,Bot",
+      "FilePolarity": "Negative"
+    },
+    {
+      "Path": "pcb-Edge_Cuts.gbr",
+      "FileFunction": "Profile",
+      "FilePolarity": "Positive"
+    }
+  ],
+  "MaterialStackup": [
+    {
+      "Type": "Legend",
+      "Name": "Top Silk Screen"
+    },
+    {
+      "Type": "SolderPaste",
+      "Name": "Top Solder Paste"
+    },
+    {
+      "Type": "SolderMask",
+      "Name": "Top Solder Mask"
+    },
+    {
+      "Type": "Copper",
+      "Name": "F.Cu"
+    },
+    {
+      "Type": "Dielectric",
+      "Material": "FR4",
+      "Name": "F.Cu/B.Cu",
+      "Notes": "Type: dielectric layer 1 (from F.Cu to B.Cu)"
+    },
+    {
+      "Type": "Copper",
+      "Name": "B.Cu"
+    },
+    {
+      "Type": "SolderMask",
+      "Name": "Bottom Solder Mask"
+    },
+    {
+      "Type": "SolderPaste",
+      "Name": "Bottom Solder Paste"
+    },
+    {
+      "Type": "Legend",
+      "Name": "Bottom Silk Screen"
+    }
+  ]
+}

pcb/pcb.kicad_prl

@@ -0,0 +1,75 @@
+{
+  "board": {
+    "active_layer": 31,
+    "active_layer_preset": "",
+    "auto_track_width": true,
+    "hidden_nets": [],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "pads": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "ratsnest_display_mode": 0,
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": true,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      8,
+      9,
+      10,
+      11,
+      12,
+      13,
+      14,
+      15,
+      16,
+      17,
+      18,
+      19,
+      20,
+      21,
+      22,
+      23,
+      24,
+      25,
+      26,
+      27,
+      28,
+      29,
+      30,
+      32,
+      33,
+      34,
+      35,
+      36
+    ],
+    "visible_layers": "ffdffff_ffffffff",
+    "zone_display_mode": 0
+  },
+  "meta": {
+    "filename": "pcb.kicad_prl",
+    "version": 3
+  },
+  "project": {
+    "files": []
+  }
+}

pcb/pcb.kicad_pro

@@ -0,0 +1,454 @@
+{
+  "board": {
+    "design_settings": {
+      "defaults": {
+        "board_outline_line_width": 0.09999999999999999,
+        "copper_line_width": 0.19999999999999998,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.049999999999999996,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": false,
+          "text_position": 0,
+          "units_format": 1
+        },
+        "fab_line_width": 0.09999999999999999,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.15,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.762,
+          "height": 1.524,
+          "width": 1.524
+        },
+        "silk_line_width": 0.15,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.15,
+        "silk_text_upright": false,
+        "zones": {
+          "45_degree_only": false,
+          "min_clearance": 0.508
+        }
+      },
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
+      "drc_exclusions": [],
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "copper_edge_clearance": "error",
+        "courtyards_overlap": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint_type_mismatch": "error",
+        "hole_clearance": "error",
+        "hole_near_hole": "error",
+        "invalid_outline": "error",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "error",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_dangling": "warning",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zone_has_empty_net": "error",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "allow_blind_buried_vias": false,
+        "allow_microvias": false,
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_copper_edge_clearance": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.19999999999999998,
+        "min_microvia_drill": 0.09999999999999999,
+        "min_silk_clearance": 0.0,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.19999999999999998,
+        "min_via_annular_width": 0.049999999999999996,
+        "min_via_diameter": 0.39999999999999997,
+        "solder_mask_clearance": 0.0,
+        "solder_mask_min_width": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "track_widths": [
+        0.0
+      ],
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        }
+      ],
+      "zones_allow_external_fillets": false,
+      "zones_use_no_outline": true
+    },
+    "layer_presets": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "erc": {
+    "erc_exclusions": [],
+    "meta": {
+      "version": 0
+    },
+    "pin_map": [
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0,
+        1,
+        2
+      ],
+      [
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        1,
+        1,
+        2,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        2,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2
+      ]
+    ],
+    "rule_severities": {
+      "bus_definition_conflict": "error",
+      "bus_entry_needed": "error",
+      "bus_label_syntax": "error",
+      "bus_to_bus_conflict": "error",
+      "bus_to_net_conflict": "error",
+      "different_unit_footprint": "error",
+      "different_unit_net": "error",
+      "duplicate_reference": "error",
+      "duplicate_sheet_names": "error",
+      "extra_units": "error",
+      "global_label_dangling": "warning",
+      "hier_label_mismatch": "error",
+      "label_dangling": "error",
+      "lib_symbol_issues": "warning",
+      "multiple_net_names": "warning",
+      "net_not_bus_member": "warning",
+      "no_connect_connected": "warning",
+      "no_connect_dangling": "warning",
+      "pin_not_connected": "error",
+      "pin_not_driven": "error",
+      "pin_to_pin": "warning",
+      "power_pin_not_driven": "error",
+      "similar_labels": "warning",
+      "unannotated": "error",
+      "unit_value_mismatch": "error",
+      "unresolved_variable": "error",
+      "wire_dangling": "error"
+    }
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "pcb.kicad_pro",
+    "version": 1
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12.0,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.127,
+        "via_diameter": 0.8,
+        "via_drill": 0.4,
+        "wire_width": 6.0
+      },
+      {
+        "bus_width": 12.0,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Power",
+        "nets": [
+          "+5V",
+          "GND"
+        ],
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.254,
+        "via_diameter": 0.8,
+        "via_drill": 0.4,
+        "wire_width": 6.0
+      }
+    ],
+    "meta": {
+      "version": 2
+    },
+    "net_colors": null
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "../../../",
+      "specctra_dsn": "",
+      "step": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "annotate_start_num": 0,
+    "drawing": {
+      "default_line_thickness": 6.0,
+      "default_text_size": 50.0,
+      "field_names": [],
+      "intersheets_ref_own_page": false,
+      "intersheets_ref_prefix": "",
+      "intersheets_ref_short": false,
+      "intersheets_ref_show": false,
+      "intersheets_ref_suffix": "",
+      "junction_size_choice": 3,
+      "label_size_ratio": 0.375,
+      "pin_symbol_size": 25.0,
+      "text_offset_ratio": 0.15
+    },
+    "legacy_lib_dir": "",
+    "legacy_lib_list": [],
+    "meta": {
+      "version": 1
+    },
+    "net_format_name": "KiCad",
+    "ngspice": {
+      "fix_include_paths": true,
+      "fix_passive_vals": false,
+      "meta": {
+        "version": 0
+      },
+      "model_mode": 0,
+      "workbook_filename": ""
+    },
+    "page_layout_descr_file": "",
+    "plot_directory": "../../../tmp/",
+    "spice_adjust_passive_values": false,
+    "spice_external_command": "spice \"%I\"",
+    "subpart_first_id": 65,
+    "subpart_id_separator": 0
+  },
+  "sheets": [
+    [
+      "cf386a39-fc62-49dd-8ec5-e044f6bd67ce",
+      ""
+    ]
+  ],
+  "text_variables": {}
+}

pcb/pcb.net

@@ -0,0 +1,336 @@
+(export (version "E")
+  (design
+    (source "/home/dartcatcher/src/uilleann/pcb/pcb.kicad_sch")
+    (date "Sat 30 Apr 2022 11:06:15 AM MST")
+    (tool "Eeschema 6.0.4")
+    (sheet (number "1") (name "/") (tstamps "/")
+      (title_block
+        (title "Uileann Touch Pads")
+        (company)
+        (rev "1")
+        (date "2022-04-30")
+        (source "pcb.kicad_sch")
+        (comment (number "1") (value ""))
+        (comment (number "2") (value ""))
+        (comment (number "3") (value ""))
+        (comment (number "4") (value ""))
+        (comment (number "5") (value ""))
+        (comment (number "6") (value ""))
+        (comment (number "7") (value ""))
+        (comment (number "8") (value ""))
+        (comment (number "9") (value "")))))
+  (components
+    (comp (ref "J1")
+      (value "Conn_01x04_Male")
+      (footprint "Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal")
+      (libsource (lib "Connector") (part "Conn_01x04_Male") (description "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "8a620091-ca96-495f-aabc-835f155bc446"))
+    (comp (ref "J2")
+      (value "Conn_01x12")
+      (footprint "Connector_PinHeader_1.00mm:PinHeader_1x12_P1.00mm_Vertical")
+      (libsource (lib "Connector_Generic") (part "Conn_01x12") (description "Generic connector, single row, 01x12, script generated (kicad-library-utils/schlib/autogen/connector/)"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "17140126-998a-4315-b890-16c2568f9cb2"))
+    (comp (ref "R0")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "1c29e414-397e-4fe3-9282-d1236b08d101"))
+    (comp (ref "R1")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "82c70959-b503-4056-8977-14e7751759b0"))
+    (comp (ref "R2")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "1def42ff-405e-4401-917b-3918ab6675e6"))
+    (comp (ref "R3")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "43c283c0-09ff-4eaa-81b5-a3a40517c258"))
+    (comp (ref "R4")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "7a20e88e-79b0-4fb3-a32c-3d811463a4f0"))
+    (comp (ref "R5")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "09c9f555-0892-40f7-9f07-31a83cdfb501"))
+    (comp (ref "R6")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "be9f8ac6-df11-4654-9893-49790c99e6d6"))
+    (comp (ref "R7")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "518a3875-a78a-460c-b783-de70a8155894"))
+    (comp (ref "R8")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "b9136556-e5f0-4fc6-b60b-bf9d35b79d98"))
+    (comp (ref "R9")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "ad4b1132-3a8b-45eb-a3a4-67e7dc4aa528"))
+    (comp (ref "R10")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "5a655cda-90c8-4534-9e2f-854b3caab534"))
+    (comp (ref "R11")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "d74fdcda-6587-4235-af59-5f565ea01127"))
+    (comp (ref "R12")
+      (value "R_US")
+      (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "c47a7547-e6f0-4cd8-b807-5ca888e9c3ce"))
+    (comp (ref "R13")
+      (value "R_US")
+      (footprint "Connector_PinHeader_1.00mm:PinHeader_1x12_P1.00mm_Vertical")
+      (libsource (lib "Device") (part "R_US") (description "Resistor, US symbol"))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "012424b2-0613-4eb3-af69-91559c272f7c"))
+    (comp (ref "U1")
+      (value "AT42QT2120-SU")
+      (footprint "Package_SO:SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm")
+      (libsource (lib "AT42QT2120") (part "AT42QT2120-XU") (description ""))
+      (property (name "Sheetname") (value ""))
+      (property (name "Sheetfile") (value "pcb.kicad_sch"))
+      (sheetpath (names "/") (tstamps "/"))
+      (tstamps "b9c37ec9-c901-46e7-a698-79236800dbf3")))
+  (libparts
+    (libpart (lib "AT42QT2120") (part "AT42QT2120-XU")
+      (fields
+        (field (name "Reference") "U")
+        (field (name "Value") "AT42QT2120-XU")
+        (field (name "Footprint") "Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm"))
+      (pins
+        (pin (num "1") (name "KEY8/GPO6") (type "input"))
+        (pin (num "2") (name "KEY7/GPO5") (type "input"))
+        (pin (num "3") (name "KEY6/GPO4") (type "input"))
+        (pin (num "4") (name "KEY5/GPO3") (type "input"))
+        (pin (num "5") (name "KEY4/GPO2") (type "input"))
+        (pin (num "6") (name "KEY3/GPO1") (type "input"))
+        (pin (num "7") (name "KEY2/GP00") (type "input"))
+        (pin (num "8") (name "KEY1") (type "input"))
+        (pin (num "9") (name "KEY0") (type "input"))
+        (pin (num "10") (name "VSS") (type "power_in"))
+        (pin (num "11") (name "VDD") (type "power_in"))
+        (pin (num "12") (name "MODE") (type "input"))
+        (pin (num "13") (name "SDA") (type "bidirectional"))
+        (pin (num "14") (name "RESET") (type "input"))
+        (pin (num "15") (name "NC") (type "no_connect"))
+        (pin (num "16") (name "SCL") (type "bidirectional"))
+        (pin (num "17") (name "CHANGE") (type "output"))
+        (pin (num "18") (name "KEY/11/GPO9") (type "input"))
+        (pin (num "19") (name "KEY10/GPO8") (type "input"))
+        (pin (num "20") (name "KEY9/GPO7") (type "input"))))
+    (libpart (lib "Connector") (part "Conn_01x04_Male")
+      (description "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)")
+      (docs "~")
+      (footprints
+        (fp "Connector*:*_1x??_*"))
+      (fields
+        (field (name "Reference") "J")
+        (field (name "Value") "Conn_01x04_Male")
+        (field (name "Datasheet") "~"))
+      (pins
+        (pin (num "1") (name "Pin_1") (type "passive"))
+        (pin (num "2") (name "Pin_2") (type "passive"))
+        (pin (num "3") (name "Pin_3") (type "passive"))
+        (pin (num "4") (name "Pin_4") (type "passive"))))
+    (libpart (lib "Connector_Generic") (part "Conn_01x12")
+      (description "Generic connector, single row, 01x12, script generated (kicad-library-utils/schlib/autogen/connector/)")
+      (docs "~")
+      (footprints
+        (fp "Connector*:*_1x??_*"))
+      (fields
+        (field (name "Reference") "J")
+        (field (name "Value") "Conn_01x12")
+        (field (name "Datasheet") "~"))
+      (pins
+        (pin (num "1") (name "Pin_1") (type "passive"))
+        (pin (num "2") (name "Pin_2") (type "passive"))
+        (pin (num "3") (name "Pin_3") (type "passive"))
+        (pin (num "4") (name "Pin_4") (type "passive"))
+        (pin (num "5") (name "Pin_5") (type "passive"))
+        (pin (num "6") (name "Pin_6") (type "passive"))
+        (pin (num "7") (name "Pin_7") (type "passive"))
+        (pin (num "8") (name "Pin_8") (type "passive"))
+        (pin (num "9") (name "Pin_9") (type "passive"))
+        (pin (num "10") (name "Pin_10") (type "passive"))
+        (pin (num "11") (name "Pin_11") (type "passive"))
+        (pin (num "12") (name "Pin_12") (type "passive"))))
+    (libpart (lib "Device") (part "R_US")
+      (description "Resistor, US symbol")
+      (docs "~")
+      (footprints
+        (fp "R_*"))
+      (fields
+        (field (name "Reference") "R")
+        (field (name "Value") "R_US")
+        (field (name "Datasheet") "~"))
+      (pins
+        (pin (num "1") (name "") (type "passive"))
+        (pin (num "2") (name "") (type "passive")))))
+  (libraries
+    (library (logical "AT42QT2120")
+      (uri "/home/dartcatcher/.var/app/org.kicad.KiCad/data/kicad/6.0/symbols/AT42QT2120.lib"))
+    (library (logical "Connector")
+      (uri "/app/extensions/Library/symbols//Connector.kicad_sym"))
+    (library (logical "Connector_Generic")
+      (uri "/app/extensions/Library/symbols//Connector_Generic.kicad_sym"))
+    (library (logical "Device")
+      (uri "/app/extensions/Library/symbols//Device.kicad_sym")))
+  (nets
+    (net (code "1") (name "+5V")
+      (node (ref "J1") (pin "2") (pinfunction "Pin_2") (pintype "passive"))
+      (node (ref "R12") (pin "2") (pintype "passive"))
+      (node (ref "R13") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "11") (pinfunction "VDD") (pintype "power_in"))
+      (node (ref "U1") (pin "14") (pinfunction "RESET") (pintype "input"))
+      (node (ref "U1") (pin "17") (pinfunction "CHANGE") (pintype "output")))
+    (net (code "2") (name "GND")
+      (node (ref "J1") (pin "1") (pinfunction "Pin_1") (pintype "passive"))
+      (node (ref "U1") (pin "10") (pinfunction "VSS") (pintype "power_in"))
+      (node (ref "U1") (pin "12") (pinfunction "MODE") (pintype "input")))
+    (net (code "3") (name "Net-(J1-Pad3)")
+      (node (ref "J1") (pin "3") (pinfunction "Pin_3") (pintype "passive"))
+      (node (ref "R12") (pin "1") (pintype "passive"))
+      (node (ref "U1") (pin "13") (pinfunction "SDA") (pintype "bidirectional")))
+    (net (code "4") (name "Net-(J1-Pad4)")
+      (node (ref "J1") (pin "4") (pinfunction "Pin_4") (pintype "passive"))
+      (node (ref "R13") (pin "1") (pintype "passive"))
+      (node (ref "U1") (pin "16") (pinfunction "SCL") (pintype "bidirectional")))
+    (net (code "5") (name "Net-(R0-Pad1)")
+      (node (ref "J2") (pin "1") (pinfunction "Pin_1") (pintype "passive"))
+      (node (ref "R0") (pin "1") (pintype "passive")))
+    (net (code "6") (name "Net-(R0-Pad2)")
+      (node (ref "R0") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "9") (pinfunction "KEY0") (pintype "input")))
+    (net (code "7") (name "Net-(R1-Pad1)")
+      (node (ref "J2") (pin "2") (pinfunction "Pin_2") (pintype "passive"))
+      (node (ref "R1") (pin "1") (pintype "passive")))
+    (net (code "8") (name "Net-(R1-Pad2)")
+      (node (ref "R1") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "8") (pinfunction "KEY1") (pintype "input")))
+    (net (code "9") (name "Net-(R2-Pad1)")
+      (node (ref "J2") (pin "3") (pinfunction "Pin_3") (pintype "passive"))
+      (node (ref "R2") (pin "1") (pintype "passive")))
+    (net (code "10") (name "Net-(R2-Pad2)")
+      (node (ref "R2") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "7") (pinfunction "KEY2/GP00") (pintype "input")))
+    (net (code "11") (name "Net-(R3-Pad1)")
+      (node (ref "J2") (pin "4") (pinfunction "Pin_4") (pintype "passive"))
+      (node (ref "R3") (pin "1") (pintype "passive")))
+    (net (code "12") (name "Net-(R3-Pad2)")
+      (node (ref "R3") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "6") (pinfunction "KEY3/GPO1") (pintype "input")))
+    (net (code "13") (name "Net-(R4-Pad1)")
+      (node (ref "J2") (pin "5") (pinfunction "Pin_5") (pintype "passive"))
+      (node (ref "R4") (pin "1") (pintype "passive")))
+    (net (code "14") (name "Net-(R4-Pad2)")
+      (node (ref "R4") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "5") (pinfunction "KEY4/GPO2") (pintype "input")))
+    (net (code "15") (name "Net-(R5-Pad1)")
+      (node (ref "J2") (pin "6") (pinfunction "Pin_6") (pintype "passive"))
+      (node (ref "R5") (pin "1") (pintype "passive")))
+    (net (code "16") (name "Net-(R5-Pad2)")
+      (node (ref "R5") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "4") (pinfunction "KEY5/GPO3") (pintype "input")))
+    (net (code "17") (name "Net-(R6-Pad1)")
+      (node (ref "J2") (pin "7") (pinfunction "Pin_7") (pintype "passive"))
+      (node (ref "R6") (pin "1") (pintype "passive")))
+    (net (code "18") (name "Net-(R6-Pad2)")
+      (node (ref "R6") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "3") (pinfunction "KEY6/GPO4") (pintype "input")))
+    (net (code "19") (name "Net-(R7-Pad1)")
+      (node (ref "J2") (pin "8") (pinfunction "Pin_8") (pintype "passive"))
+      (node (ref "R7") (pin "1") (pintype "passive")))
+    (net (code "20") (name "Net-(R7-Pad2)")
+      (node (ref "R7") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "2") (pinfunction "KEY7/GPO5") (pintype "input")))
+    (net (code "21") (name "Net-(R8-Pad1)")
+      (node (ref "J2") (pin "9") (pinfunction "Pin_9") (pintype "passive"))
+      (node (ref "R8") (pin "1") (pintype "passive")))
+    (net (code "22") (name "Net-(R8-Pad2)")
+      (node (ref "R8") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "1") (pinfunction "KEY8/GPO6") (pintype "input")))
+    (net (code "23") (name "Net-(R9-Pad1)")
+      (node (ref "J2") (pin "10") (pinfunction "Pin_10") (pintype "passive"))
+      (node (ref "R9") (pin "1") (pintype "passive")))
+    (net (code "24") (name "Net-(R9-Pad2)")
+      (node (ref "R9") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "20") (pinfunction "KEY9/GPO7") (pintype "input")))
+    (net (code "25") (name "Net-(R10-Pad1)")
+      (node (ref "J2") (pin "11") (pinfunction "Pin_11") (pintype "passive"))
+      (node (ref "R10") (pin "1") (pintype "passive")))
+    (net (code "26") (name "Net-(R10-Pad2)")
+      (node (ref "R10") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "19") (pinfunction "KEY10/GPO8") (pintype "input")))
+    (net (code "27") (name "Net-(R11-Pad1)")
+      (node (ref "J2") (pin "12") (pinfunction "Pin_12") (pintype "passive"))
+      (node (ref "R11") (pin "1") (pintype "passive")))
+    (net (code "28") (name "Net-(R11-Pad2)")
+      (node (ref "R11") (pin "2") (pintype "passive"))
+      (node (ref "U1") (pin "18") (pinfunction "KEY/11/GPO9") (pintype "input")))
+    (net (code "29") (name "unconnected-(U1-Pad15)")
+      (node (ref "U1") (pin "15") (pinfunction "NC") (pintype "no_connect")))))

pcb/sym-lib-table

@@ -0,0 +1,3 @@
+(sym_lib_table
+  (lib (name "AT42QT2120")(type "Legacy")(uri "/home/dartcatcher/.var/app/org.kicad.KiCad/data/kicad/6.0/symbols/AT42QT2120.lib")(options "")(descr ""))
+)