Fully move to new NTP thingy

README.md

@@ -97,17 +97,8 @@ it displays something like a clock.
 * There are four pixels around the bottom that move every 5 seconds
 
 
-Update
-------
-
-You can upload a new version of the firmware.
-Reset the device, 
-and select the "Update" button instead of configuring WiFi.
-Then you can upload the new .bin firmware file.
-
-You may have to reconfigure networking after this.
-
-### Uploading from CLI
+Updating Firmware
+-----------------
 
     python3 esptool.py --chip esp32 --port "/dev/ttyUSB0" --baud 921600  --before default_reset --after hard_reset write_flash  -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x1000 wallart.ino.bootloader.bin 0x8000 wallart.ino.partitions.bin 0xe000 boot_app0.bin 0x10000 wallart.ino.bin 
 

network.cpp

@@ -2,6 +2,7 @@
 #include <WiFiManager.h>
 #include <WiFiManagerTz.h>
 #include <esp_wifi.h>
+#include <esp_sntp.h>
 #include <HTTPClient.h>	
 #include <WiFiClientSecure.h>
 #include "network.h"
@@ -13,11 +14,17 @@ void network_reset() {
   wfm.resetSettings();
 }
 
-void on_time_available(struct timeval *t)
-{
+
+bool time_was_accurate_once = false;
+bool clock_is_set() {
+  return time_was_accurate_once;
+}
+
+void on_time_available(struct timeval *t) {
   struct tm timeInfo;
   getLocalTime(&timeInfo, 1000);
   Serial.println(&timeInfo, "%A, %B %d %Y %H:%M:%S %Z %z ");
+  time_was_accurate_once = true;
 }
 
 void network_setup(char *password) {

network.h

@@ -8,3 +8,4 @@ void network_setup(char *password);
 bool connected();
 void pause(uint32_t dwMs);
 void netget(int count);
+bool clock_is_set();

timezones.h

@@ -1,17 +0,0 @@
-#include <Timezone.h>
-
-TimeChangeRule usEDT = {"EDT", Second, Sun, Mar, 2, -240};
-TimeChangeRule usEST = {"EST", First, Sun, Nov, 2, -300};
-Timezone TZ_US_Eastern(usEDT, usEST);
-
-TimeChangeRule usCDT = {"CDT", Second, Sun, Mar, 2, -300};
-TimeChangeRule usCST = {"CST", First, Sun, Nov, 2, -360};
-Timezone TZ_US_Central(usCDT, usCST);
-
-TimeChangeRule usMDT = {"MDT", Second, Sun, Mar, 2, -360};
-TimeChangeRule usMST = {"MST", First, Sun, Nov, 2, -420};
-Timezone TZ_US_Mountain(usMDT, usMST);
-
-TimeChangeRule usPDT = {"EDT", Second, Sun, Mar, 2, -420};
-TimeChangeRule usPST = {"EST", First, Sun, Nov, 2, -480};
-Timezone TZ_US_Pacific(usPDT, usPST);

wallart.ino

@@ -10,7 +10,6 @@
 #define NEOPIXEL_PIN 32
 #define GRIDLEN 64
 #define WFM_PASSWORD "artsy fartsy"
-#define TIMEZONE TZ_US_Eastern
 
 /* 
  * The hours when the day begins and ends.
@@ -275,17 +274,21 @@ void spinner(int count=32) {
 }
 
 void displayTime(unsigned long duration = 20*SECOND) {
-  if (timeStatus() != timeSet) return;
+  if (!clock_is_set()) return;
   unsigned long end = millis() + duration;
+
   FastLED.clear();
 
   while (millis() < end) {
-    int hh = hour();
-    int mmss = now() % 3600;
+    struct tm info;
+    getLocalTime(&info);
+
+    int hh = info.tm_hour;
+    int mmss = (info.tm_min * 60) + info.tm_sec;
     uint8_t hue = HUE_YELLOW;
 
     // Top: Hours
-    if (isPM()) {
+    if (hh >= 12) {
       hue = HUE_ORANGE;
       hh -= 12;
     }
@@ -298,10 +301,10 @@ void displayTime(unsigned long duration = 20 * SECOND) {
 
     // Outer: 5s
     uint8_t s = (mmss/5) % 5;
-    grid[64 -  7 - 1] = CHSV(HUE_PURPLE, 128, (s==1)?96:0);
-    grid[64 - 15 - 1] = CHSV(HUE_PURPLE, 128, (s==2)?96:0);
-    grid[64 -  8 - 1] = CHSV(HUE_PURPLE, 128, (s==3)?96:0);
-    grid[64 -  0 - 1] = CHSV(HUE_PURPLE, 128, (s==4)?96:0);
+    grid[64 -  7 - 1] = CHSV(HUE_GREEN, 128, (s==1)?96:0);
+    grid[64 - 15 - 1] = CHSV(HUE_GREEN, 128, (s==2)?96:0);
+    grid[64 -  8 - 1] = CHSV(HUE_GREEN, 128, (s==3)?96:0);
+    grid[64 -  0 - 1] = CHSV(HUE_GREEN, 128, (s==4)?96:0);
 
     for (int i = 0; i < 12; i++) {
       // Omit first and last position on a row
@@ -339,11 +342,11 @@ void loop() {
   uint8_t getprob = 4;
   bool conn = connected();
   bool day = true;
-  timeStatus_t ts = timeStatus();
 
-  if (ts == timeSet) {
-    int hh = hour();
-    day = ((hh >= DAY_BEGIN) && (hh < DAY_END));
+  if (clock_is_set()) {
+    struct tm info;
+    getLocalTime(&info);
+    day = ((info.tm_hour >= DAY_BEGIN) && (info.tm_hour < DAY_END));
   }
   FastLED.setBrightness(day?DAY_BRIGHTNESS:NIGHT_BRIGHTNESS);
 
@@ -352,8 +355,9 @@ void loop() {
     getprob = 16;
   }
 
-  if ((ts == timeSet) && (!day || p.Pick(4))) {
-    // At night, only ever show the clock
+  if (!day && clock_is_set()) {
+    displayTime();
+  } else if (p.Pick(4) && clock_is_set()) {
     displayTime(2 * MINUTE);
   } else if (p.Pick(getprob)) {
     netget();