Many changes for v2
* Send left and right ctrl, VBand's secret keys for their adapter * Flash lights twice at bootup * LED reflects whether keyboard mode is enabled * MIDI receive: if you release key C0, we stop sending keyboard events * Get rid of the "keyboard mode" pin * Add Makefile so I don't have to use Arduino IDE
This commit is contained in:
parent
fa3596f6a9
commit
0962708f27
|
|
@ -0,0 +1 @@
|
|||
build/
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
FQBN = Seeeduino:samd:seeed_XIAO_m0
|
||||
UF2_MOUNT = /mnt/chromeos/removable/Arduino
|
||||
ARDUINO_DIR = /app/Arduino
|
||||
BUILDER = flatpak run --command ${ARDUINO_DIR}/arduino-builder cc.arduino.arduinoide
|
||||
|
||||
default: build/vail-adapter.ino.uf2
|
||||
install: build/vail-adapter.ino.uf2
|
||||
./install.sh $< $(UF2_MOUNT)
|
||||
|
||||
# uf2conv.py is covered by an MIT license.
|
||||
build/uf2conv.py: build/uf2families.json
|
||||
mkdir -p build
|
||||
curl -L https://raw.githubusercontent.com/microsoft/uf2/master/utils/$(@F) > $@
|
||||
chmod +x $@
|
||||
build/uf2families.json:
|
||||
mkdir -p build
|
||||
curl -L https://raw.githubusercontent.com/microsoft/uf2/master/utils/$(@F) > $@
|
||||
|
||||
%.uf2: %.bin build/uf2conv.py
|
||||
build/uf2conv.py -b 0x2000 -c -o $@ $<
|
||||
|
||||
build/%.bin: % *.cpp *.h
|
||||
arduino-builder \
|
||||
-build-cache ~/.cache/arduino \
|
||||
-build-path build \
|
||||
-core-api-version 10813 \
|
||||
-fqbn $(FQBN) \
|
||||
-hardware ~/.arduino15/packages \
|
||||
-tools $(ARDUINO_DIR)/tools-builder \
|
||||
-tools ~/.arduino15/packages \
|
||||
-hardware $(ARDUINO_DIR)/hardware \
|
||||
-hardware ~/.arduino15/packages \
|
||||
-built-in-libraries $(ARDUINO_DIR)/libraries \
|
||||
-libraries ~/Arduino/libraries \
|
||||
-compile \
|
||||
$<
|
||||
|
||||
upload: vail-adapter.ino
|
||||
arduino --upload --board $(FQBN) $<
|
||||
|
|
@ -1,32 +1,33 @@
|
|||
:Author: neale
|
||||
:Email: neale@woozle.org
|
||||
:Date: 2020-May-3
|
||||
:Revision: 1
|
||||
:License: MIT
|
||||
---
|
||||
Author: neale
|
||||
Email: neale@woozle.org
|
||||
License: MIT
|
||||
---
|
||||
|
||||
= Project: USB Morse Adapter
|
||||
# Project: USB Morse Adapter
|
||||
|
||||
image:https://lh3.googleusercontent.com/pw/ACtC-3d9xbLxL23QeLm-3gy3-Yt0VHE3IlQ-qyMDqTfdF6Bo7fHkkokACdIs68pmXevu14VzrrCeKj1JmRUiekUNiZe9J9rYIh_pTagvCbKSzpY8Ynp1m6cF4G_jTvtiU5eRtoNCsmU5OLy2SR9kYcCDYSt-AA=s1471-no["Vail adapter, assembled and connected",width=300,https://lh3.googleusercontent.com/pw/ACtC-3d9xbLxL23QeLm-3gy3-Yt0VHE3IlQ-qyMDqTfdF6Bo7fHkkokACdIs68pmXevu14VzrrCeKj1JmRUiekUNiZe9J9rYIh_pTagvCbKSzpY8Ynp1m6cF4G_jTvtiU5eRtoNCsmU5OLy2SR9kYcCDYSt-AA=s1471-no]
|
||||
|
||||
|
||||
This translates Morse key inputs into USB events,
|
||||
either MIDI or MIDI+Keyboard,
|
||||
so you can use a computer.
|
||||
|
||||
It is fully compatible with [VBand](https://hamradio.solutions/vband/)
|
||||
and anything else that uses the VBand adapter.
|
||||
|
||||
I use this with an Internet morse code repeater I wrote,
|
||||
available at https://vail.woozle.org/.
|
||||
It will also work with [VBand](https://hamradio.solutions/vband/),
|
||||
in MIDI+Keyboard mode.
|
||||
|
||||
This project requires an Arduino that can send USB.
|
||||
The following should work:
|
||||
|
||||
=== Verified Working
|
||||
### Verified Working
|
||||
|
||||
* Seeeduino Xiao
|
||||
* Seeeduino Xiao **(recommended)**
|
||||
* Arduino Micro
|
||||
* KeeYees Pro Micro
|
||||
|
||||
=== Unverified but should work
|
||||
### Unverified but should work
|
||||
|
||||
Any USB-capable Arduino should be fine, including:
|
||||
|
||||
|
|
@ -39,28 +40,30 @@ Any USB-capable Arduino should be fine, including:
|
|||
You might even be able to get a Digispark (attiny85) to work,
|
||||
but this may require a little hacking. Send me a patch, if you do!
|
||||
|
||||
== Step 1: Installation
|
||||
## Step 1: Installation
|
||||
|
||||
If Arduino Create still exists when you're reading this,
|
||||
you might be able to load up
|
||||
https://create.arduino.cc/editor/neale/f94bb765-47bd-4bc4-9cbf-b978f7124bdc[my project]
|
||||
and program your board without too much fuss.
|
||||
#### The Easy Way
|
||||
|
||||
Otherwise you are going to need to install the MidiUSB and Keyboard libraries.
|
||||
I plan to begin releasing precompiled images for the Seeeduino XIAO.
|
||||
You should be able to
|
||||
[enter bootloader mode](https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode)
|
||||
and just drag the `.uf2` file onto the new drive it provides,
|
||||
then you're done.
|
||||
|
||||
#### The Other Way
|
||||
|
||||
Install the MidiUSB and Keyboard libraries.
|
||||
These are highly popular libraries,
|
||||
and there is much better documentation elsewhere on the Internet.
|
||||
The code should then build in the Arduino IDE.
|
||||
|
||||
## Step 2: Assmble the circuit
|
||||
|
||||
== Step 2: Assmble the circuit
|
||||
### For the impatient:
|
||||
|
||||
=== For the impatient:
|
||||
[Photos of assembled circuit](https://github.com/nealey/vail-adapter/wiki)
|
||||
|
||||
https://github.com/nealey/vail-adapter/wiki[Photos of assembled circuit]
|
||||
|
||||
Remember to jump pin 9 to ground for Firefox,
|
||||
or VBand.
|
||||
|
||||
=== For the inquisitive:
|
||||
### For the inquisitive:
|
||||
|
||||
Morse code keyers are very simple devices,
|
||||
they just connect two wires together.
|
||||
|
|
@ -70,22 +73,21 @@ or even touch wires together.
|
|||
The only real complication here is that some browsers
|
||||
need to get keyboard events instead of musical instrument events.
|
||||
|
||||
The Vail adapter boots into a mode that sends both keyboard events
|
||||
and MIDI messages.
|
||||
If it receives a MIDI key release event
|
||||
on channel 0
|
||||
for note C0,
|
||||
it will disable keyboard events.
|
||||
|
||||
=== Decide what browser you're going to use
|
||||
Vail sends this "disable keyboard" MIDI event, so as soon as you
|
||||
load up Vail, the keyboard events are disabled, and your adapter
|
||||
will no longer interfere with your typing.
|
||||
If your browser doesn't support MIDI,
|
||||
the disable command can't be sent,
|
||||
and it keeps on sending keystrokes.
|
||||
|
||||
Firefox needs a jumper between pin 9 and ground.
|
||||
Just take a wire, and connect pin 9 directly to ground.
|
||||
This puts the Arduino into "keyboard mode",
|
||||
where it sends a comma for straight key,
|
||||
and brackets for iambic.
|
||||
|
||||
If you don't connect pin 9 to ground,
|
||||
the Arudino only sends MIDI (Musical Instrument Digital Interface)
|
||||
events, so it looks like you hooked a piano up.
|
||||
This works great in Chrome,
|
||||
and lets you switch to other windows while still keying into vail.
|
||||
|
||||
=== Wire up your input device
|
||||
### Wire up your input device
|
||||
|
||||
Hook a straight key into ground on one side,
|
||||
pin 10 on the other.
|
||||
|
|
@ -109,21 +111,15 @@ Make sure any straight key you plug in has a TS adapter (mono plug):
|
|||
this will short pin 11 to ground and signal to the Arduino to
|
||||
go into straight key mode.
|
||||
|
||||
You need to reset the Arduino if you change from an iambic to straight key.
|
||||
On the micro, reset is a white button.
|
||||
|
||||
If you plug in your straight key and it looks like DAH is being held down,
|
||||
it means you need to switch the connections to pins 11 and 12.
|
||||
|
||||
If you plug in your straight key and it looks like DIT is being held down,
|
||||
it means you need to reset the Arduino to make it detect the key type again.
|
||||
If you change from an iambic key to a straight key,
|
||||
you'll have to reset the adapter by unplugging it from the computer.
|
||||
|
||||
|
||||
== Step 3: Load the code
|
||||
## Step 3: Load the code
|
||||
|
||||
Upload the code contained in this sketch on to your board.
|
||||
|
||||
== Step 4: Test it out
|
||||
## Step 4: Test it out
|
||||
|
||||
Make sure it's plugged in to your computer's USB port.
|
||||
|
||||
|
|
@ -136,8 +132,16 @@ Now you can open https://vail.woozle.org/,
|
|||
click the "KEY" button once to let the browser know it's okay to make sound,
|
||||
and you should be able to wail away on your new USB keyer.
|
||||
|
||||
## Step 5: Debugging
|
||||
|
||||
=== License
|
||||
If you plug in your straight key and it looks like DAH is being held down,
|
||||
it means you need to switch the connections to pins 11 and 12.
|
||||
|
||||
If you plug in your straight key and it looks like DIT is being held down,
|
||||
it means you need to reset the Arduino to make it detect the key type again.
|
||||
|
||||
|
||||
# License
|
||||
|
||||
This project is released under an MIT License.
|
||||
|
||||
|
|
@ -162,12 +166,12 @@ in an action of contract, tort or otherwise, arising from, out of, or in
|
|||
connection with the software or the use or other dealings in the software.
|
||||
|
||||
|
||||
=== Contributing
|
||||
# Contributing
|
||||
To contribute to this project please contact neale@woozle.org
|
||||
https://id.arduino.cc/neale
|
||||
|
||||
|
||||
=== BOM
|
||||
# BOM
|
||||
|
||||
In addition to a key, some hookup wires, and a USB cable,
|
||||
you only need a USB-capable Arduino: see above.
|
||||
|
|
@ -176,15 +180,6 @@ Since I don't know what might try to parse this section,
|
|||
I'm calling for an Arduino Micro. But, really, many options
|
||||
will work fine.
|
||||
|
||||
|===
|
||||
| ID | Part name | Part number | Quantity
|
||||
| A1 | Arduino Micro | ABX00053 | 1
|
||||
|===
|
||||
|
||||
|
||||
=== Help
|
||||
|
||||
This document is written in the _AsciiDoc_ format, a markup language to describe documents.
|
||||
If you need help you can search the http://www.methods.co.nz/asciidoc[AsciiDoc homepage]
|
||||
or consult the http://powerman.name/doc/asciidoc[AsciiDoc cheatsheet]
|
||||
|
||||
| ID | Part name | Part number | Quantity |
|
||||
| --- | ------- | ------ | ------ |
|
||||
| A1 | Seeeduino XIAO | 102010328 | 1 |
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
#! /bin/sh
|
||||
|
||||
src=$1
|
||||
dst=$2
|
||||
|
||||
info=$dst/INFO_UF2.txt
|
||||
echo -n "Waiting for $info to appear..."
|
||||
while ! [ -f $info ]; do
|
||||
echo -n "."
|
||||
sleep 1
|
||||
done
|
||||
echo "👍"
|
||||
|
||||
cp $src $dst
|
||||
echo "Installed!"
|
||||
|
|
@ -8,30 +8,27 @@
|
|||
#include "bounce2.h"
|
||||
|
||||
#ifdef ARDUINO_SEEED_XIAO_M0
|
||||
#define DIT_PIN 2
|
||||
#define DAH_PIN 1
|
||||
#define KEY_PIN 0
|
||||
# define DIT_PIN 2
|
||||
# define DAH_PIN 1
|
||||
# define KEY_PIN 0
|
||||
#else
|
||||
#define DIT_PIN 12
|
||||
#define DAH_PIN 11
|
||||
#define KEY_PIN 10
|
||||
# define DIT_PIN 12
|
||||
# define DAH_PIN 11
|
||||
# define KEY_PIN 10
|
||||
#endif
|
||||
|
||||
#define KBD_PIN 9
|
||||
|
||||
#define STRAIGHT_KEY ','
|
||||
#define DIT_KEY '['
|
||||
#define DAH_KEY ']'
|
||||
#define DIT_KEY KEY_LEFT_CTRL
|
||||
#define DAH_KEY KEY_RIGHT_CTRL
|
||||
|
||||
bool iambic = true;
|
||||
Bounce kbd = Bounce();
|
||||
bool keyboard = true;
|
||||
Bounce dit = Bounce();
|
||||
Bounce dah = Bounce();
|
||||
Bounce key = Bounce();
|
||||
|
||||
void setup() {
|
||||
pinMode(LED_BUILTIN, OUTPUT);
|
||||
kbd.attach(KBD_PIN, INPUT_PULLUP);
|
||||
dit.attach(DIT_PIN, INPUT_PULLUP);
|
||||
dah.attach(DAH_PIN, INPUT_PULLUP);
|
||||
key.attach(KEY_PIN, INPUT_PULLUP);
|
||||
|
|
@ -49,8 +46,13 @@ void setup() {
|
|||
} else {
|
||||
iambic = true;
|
||||
}
|
||||
|
||||
digitalWrite(LED_BUILTIN, !iambic);
|
||||
|
||||
// Blink 4 times
|
||||
for (int i = 0; i < 8; i += 1) {
|
||||
digitalWrite(LED_BUILTIN, i % 2);
|
||||
delay(250);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void midiKey(bool down, uint8_t key) {
|
||||
|
|
@ -59,11 +61,20 @@ void midiKey(bool down, uint8_t key) {
|
|||
MidiUSB.flush();
|
||||
}
|
||||
|
||||
void midiProbe() {
|
||||
midiEventPacket_t event = MidiUSB.read();
|
||||
if (event.byte1 == 0x80) {
|
||||
// Key release, channel 0
|
||||
if (event.byte2 == 0x00) {
|
||||
// C0 note
|
||||
keyboard = false;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void loop() {
|
||||
bool keyboard;
|
||||
|
||||
kbd.update();
|
||||
keyboard = !kbd.read();
|
||||
midiProbe();
|
||||
digitalWrite(LED_BUILTIN, !keyboard);
|
||||
|
||||
// Monitor straight key pin
|
||||
if (key.update()) {
|
||||
|
|
|
|||
Loading…
Reference in New Issue