adapter.cpp

@@ -10,7 +10,6 @@
 #define SECOND (1000 * MILLISECOND)
 
 VailAdapter::VailAdapter(unsigned int PiezoPin) {
-    this->keyboardMode = true;
     this->buzzer = new PolyBuzzer(PiezoPin);
     this->txToneFrequency = 440;
 }
@@ -109,7 +108,6 @@ void VailAdapter::HandleMIDI(midiEventPacket_t event) {
             this->keyer->Release();
         }
         this->keyer = GetKeyerByNumber(event.byte2, this);
-        this->keyer->SetDitDuration(this->ditDuration);
         break;
     case 0x80: // Note off
         this->buzzer->NoTone(1);

case/case.scad

@@ -1,7 +1,7 @@
 // Make circles lovely and round
 $fa = 1; $fs = 0.1;
 
-outer_dimensions = [24.2, 21, 25];
+outer_dimensions = [24.2, 21, 27];
 outer_radius = 3.7;
 wall_width = [1.3, 1.3, 1.3];
 inner_dimensions = outer_dimensions - (wall_width * 2);
@@ -14,20 +14,27 @@ channel = [16, 1, 1]; // Difensions of cap channel
 channel_height = 2; // How far into the case the clips need to go
 cap_thickness = 1.3;
 
-module roundedcube(size=[1, 1, 1], center=false, r=0.5) {
+// More information: https://danielupshaw.com/openscad-rounded-corners/
+module roundedcube_simple(size=[1, 1, 1], center=false, r=0.5) {
+	// If single value, convert to [x, y, z] vector
 	size = (size[0] == undef) ? [size, size, size] : size;
-    cubeSize = [size[0] - 2*r, size[1] - 2*r, size[2]];
 
-    translate(center ? [0,0,0] : size/2) {
-        union() {
-            cube([size[0], cubeSize[1], size[2]], center=true);
-            cube([cubeSize[0], size[1], size[2]], center=true);
-            for (ymul = [-0.5, 0.5]) {
-                for (xmul = [-0.5, 0.5]) {
-                    translate([cubeSize[0]*xmul, cubeSize[1]*ymul, 0]) cylinder(h=size[2], r=r, center=true);
-                }
-            }
-        }
+	translate = (center == false) ?
+		[r, r, r] :
+		[
+			r - (size[0] / 2),
+			r - (size[1] / 2),
+			r - (size[2] / 2)
+	];
+
+	translate(v = translate)
+	minkowski() {
+		cube(size = [
+			size[0] - (r * 2),
+			size[1] - (r * 2),
+			size[2] - (r * 2)
+		]);
+		sphere(r = r);
 	}
 }
 
@@ -47,12 +54,10 @@ module usb_c() {
 
 module case() {
     difference() {
-        translate((outer_dimensions * z_elevate) + ([0, 0, -1] * cap_thickness)) {
-            difference() {
-                roundedcube(outer_dimensions, center=true, r=outer_radius);
-                roundedcube(inner_dimensions, center=true, r=inner_radius);
-                translate(-outer_dimensions/2) cube([100, 100, cap_thickness]);
-            }
+        translate((outer_dimensions * z_elevate) + ([0, 0, -1] * outer_radius)) difference() {
+            roundedcube_simple(outer_dimensions, center=true, r=outer_radius);
+            roundedcube_simple(inner_dimensions, center=true, r=inner_radius);
+            translate(-outer_dimensions/2) cube([100, 100, outer_radius]);
         }
 
         // USB C port
@@ -81,7 +86,7 @@ module body() {
                         translate([-6, 0, xiao_elevation]) rotate(45, [0, 0, 1]) cube(15, center=true);
                     }
                 }
-                translate(outer_dimensions * center) roundedcube(outer_dimensions, r=outer_radius);
+                translate(outer_dimensions * center) roundedcube_simple(outer_dimensions, r=outer_radius);
             }
 
 
@@ -104,7 +109,7 @@ module body() {
         // Channel in the back to make it easier to squeeze in the XIAO
         translate([-4.5, 0, xiao_elevation]) intersection() {
             cube([13, 100, pcb_thickness], center=true);
-            roundedcube(inner_dimensions, center=true, r=cap_thickness);
+            roundedcube_simple(inner_dimensions, center=true, r=inner_radius);
         }
 
         // Channels for bottom insertion part thingy
@@ -138,11 +143,11 @@ module cap() {
     inner = inner_dimensions * 0.97; // leave 5% slop
     union() {
         intersection() {
-            roundedcube(outer_dimensions, center=true, r=outer_radius);
+            roundedcube_simple(outer_dimensions, center=true, r=outer_radius);
             translate([0, 0, cap_thickness/2]) cube([100, 100, cap_thickness], center=true);
         }
         intersection() {
-            roundedcube(inner, center=true, r=inner_radius);
+            roundedcube_simple(inner, center=true, r=inner_radius);
             translate(center * inner) cube([100, 100, cap_thickness+2.2]);
         }
         difference() {
@@ -170,9 +175,7 @@ if (TARGET == "body") {
     body();
 } else if (TARGET == "cap") {
     cap();
-} else if (true == true) {
+} else {
     color([0, 0.5, 0.5]) body();
     color([0.5, 0, 0.5]) translate([0, 0, -cap_thickness]) cap();
-} else {
-    roundedcube(10);
 }

keyers.cpp

@@ -66,7 +66,7 @@ public:
         this->ditDuration = 100;
     }
 
-    void SetDitDuration(unsigned int duration) {
+    void SetDitDuration(int duration) {
         this->ditDuration = duration;
     }
 

keyers.h

@@ -18,7 +18,7 @@ class Keyer {
 public:
     virtual void SetOutput(Transmitter *output);
     virtual void Reset();
-    virtual void SetDitDuration(unsigned int d);
+    virtual void SetDitDuration(int d);
     virtual void Release();
     virtual bool TxClosed();
     virtual bool TxClosed(int relay);

polybuzzer.cpp

@@ -16,10 +16,10 @@ void PolyBuzzer::update() {
             if (playing != tones[i]) {
                 playing = tones[i];
                 tone(this->pin, tones[i]);
-            }
                 return;
             }
         }
+    }
     this->playing = 0;
     noTone(this->pin);
 }

touchbounce.cpp

@@ -1,11 +1,11 @@
 #include "touchbounce.h"
 
 void TouchBounce::attach(int pin) {
-    this->qt = Adafruit_FreeTouch(pin, OVERSAMPLE_2, RESISTOR_0, FREQ_MODE_SPREAD);
+    this->qt = Adafruit_FreeTouch(pin, OVERSAMPLE_2, RESISTOR_50K, FREQ_MODE_NONE);
     this->qt.begin();
 }
 
 bool TouchBounce::readCurrentState() {
     int val = this->qt.measure();
-    return val > QT_THRESHOLD;
+    return val > QT_THRESHOLD/2;
 }

touchbounce.h

@@ -3,7 +3,7 @@
 #include <Adafruit_FreeTouch.h>
 #include "bounce2.h"
 
-#define QT_THRESHOLD 450
+#define QT_THRESHOLD 850
 
 class TouchBounce: public Bounce {
 public:

vail-adapter.ino

@@ -22,7 +22,7 @@
 
 #define DIT_KEYBOARD_KEY KEY_LEFT_CTRL
 #define DAH_KEYBOARD_KEY KEY_RIGHT_CTRL
-#define TONE 3000
+#define TONE 550
 
 #define MILLISECOND 1
 #define SECOND (1 * MILLISECOND)