mirror of https://github.com/nealey/vail.git
154 lines
4.7 KiB
Plaintext
154 lines
4.7 KiB
Plaintext
:Author: neale
|
|
:Email: neale@woozle.org
|
|
:Date: 2020-May-3
|
|
:Revision: 1
|
|
:License: MIT
|
|
|
|
= Project: USB Morse Adapter
|
|
|
|
This translates Morse key inputs into USB events,
|
|
either MIDI or MIDI+Keyboard,
|
|
so you can use a computer.
|
|
|
|
I use this with an Internet morse code repeater I wrote,
|
|
available at https://vail.woozle.org/.
|
|
|
|
This project requires an Arduino that can send USB.
|
|
I've only used the Micro,
|
|
although I have no doubt the Leonardo will work too,
|
|
as I've used Leonardos for similar projects.
|
|
|
|
|
|
== Step 1: Installation
|
|
|
|
This needs the MidiUSB and Keyboard libraries.
|
|
|
|
Installing those is documented all over the Internet.
|
|
I'm using https://create.arduino.cc/ so this is all magic for me.
|
|
|
|
|
|
== Step 2: Assmble the circuit
|
|
|
|
Morse code keyers are very simple devices,
|
|
they just connect two wires together.
|
|
You could use a button if you wanted to,
|
|
or even touch wires together.
|
|
|
|
The only real complication here is that some browsers
|
|
need to get keyboard events instead of musical instrument events.
|
|
|
|
|
|
=== Decide what browser you're going to use
|
|
|
|
Firefox needs a jumper between pin 9 and ground.
|
|
Just take a wire, and connect pin 9 directly to ground.
|
|
This puts the Arduino into "keyboard mode",
|
|
where it sends a comma for straight key,
|
|
and period and slash for iambic.
|
|
|
|
If you don't connect pin 9 to ground,
|
|
the Arudino only sends MIDI (Musical Instrument Digital Interface)
|
|
events, so it looks like you hooked a piano up.
|
|
This works great in Chrome,
|
|
and lets you switch to other windows while still keying into vail.
|
|
|
|
=== Wire up your input device
|
|
|
|
Hook a straight key into ground on one side,
|
|
pin 10 on the other.
|
|
It's okay to leave pin 10 disconnected if you don't have a straight key.
|
|
|
|
Hook an iambic paddle in ground in the middle,
|
|
pins 11 and 12 on the outside posts.
|
|
It's okay to leave pins 11 and 12 disconnected if you don't have a paddle.
|
|
|
|
=== Using a headphone jack
|
|
|
|
If you prefer, you can wire a headphone jack up to GND, 11, and 12.
|
|
GND should be the sleeve, 11 the ring, and 12 the tip.
|
|
|
|
o --- 12
|
|
|_| --- 11
|
|
| | --- GND
|
|
| |
|
|
|
|
Make sure any straight key you plug in has a TS adapter (mono plug):
|
|
this will short pin 11 to ground and signal to the Arduino to
|
|
go into straight key mode.
|
|
|
|
You need to reset the Arduino if you change from an iambic to straight key.
|
|
On the micro, reset is a white button.
|
|
|
|
If you plug in your straight key and it looks like DAH is being held down,
|
|
it means you need to switch the connections to pins 11 and 12.
|
|
|
|
If you plug in your straight key and it looks like DIT is being held down,
|
|
it means you need to reset the Arduino to make it detect the key type again.
|
|
|
|
|
|
== Step 3: Load the code
|
|
|
|
Upload the code contained in this sketch on to your board.
|
|
|
|
== Step 4: Test it out
|
|
|
|
Make sure it's plugged in to your computer's USB port.
|
|
|
|
If you connected pin 9 to ground,
|
|
Open anything where you can type,
|
|
type in "hello", and hit the straight key.
|
|
You should see a comma after your hello.
|
|
|
|
Now you can open https://vail.woozle.org/,
|
|
click the "KEY" button once to let the browser know it's okay to make sound,
|
|
and you should be able to wail away on your new USB keyer.
|
|
|
|
|
|
=== License
|
|
|
|
This project is released under an MIT License.
|
|
|
|
Copyright © 2020 Neale Pickett
|
|
Copyright © 2013 thomasfredericks
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining a copy of
|
|
this software and associated documentation files (the "Software"), to deal in
|
|
the Software without restriction, including without limitation the rights to
|
|
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
|
|
the Software, and to permit persons to whom the Software is furnished to do so,
|
|
subject to the following conditions:
|
|
|
|
The above copyright notice and this permission notice shall be included in all
|
|
copies or substantial portions of the Software.
|
|
|
|
The software is provided "as is", without warranty of any kind, express or
|
|
implied, including but not limited to the warranties of merchantability, fitness
|
|
for a particular purpose, and noninfringement. In no event shall the authors or
|
|
copyright holders be liable for any claim, damages, or other liability, whether
|
|
in an action of contract, tort or otherwise, arising from, out of, or in
|
|
connection with the software or the use or other dealings in the software.
|
|
|
|
|
|
=== Contributing
|
|
To contribute to this project please contact neale@woozle.org
|
|
https://id.arduino.cc/neale
|
|
|
|
|
|
=== BOM
|
|
|
|
In addition to a key, some hookup wires, and a USB cable,
|
|
you only need an Arduino.
|
|
|
|
|===
|
|
| ID | Part name | Part number | Quantity
|
|
| A1 | Arduino Micro | ABX00053 | 1
|
|
|===
|
|
|
|
|
|
=== Help
|
|
|
|
This document is written in the _AsciiDoc_ format, a markup language to describe documents.
|
|
If you need help you can search the http://www.methods.co.nz/asciidoc[AsciiDoc homepage]
|
|
or consult the http://powerman.name/doc/asciidoc[AsciiDoc cheatsheet]
|
|
|